Search results

  1. rich weyand

    Just bought a 2017 Sierra Denali CCSB

    So I'm doing a little messing around with numbers, figuring out why the 2017 Denali with the 6.2 liter has such a hole shot, even though it is a heavier (crew cab instead of regular cab) truck. Here's the numbers on my 78 Cheyenne K-10 first: 1st gear on a TH350 is 2.5:1, and the rear axle...
  2. rich weyand

    Vacuum Advance

    And here's all the whys and wherefores: http://www.gmsquarebody.com/forum/showthread.php?t=14508
  3. rich weyand

    Just bought a 2017 Sierra Denali CCSB

    One more addition to the truck. So far it's been replace OEM POS Goodyear Eagle LS-2 tires with Michelin Premiere LTX, install rolling tonneau cover, install USB with my tunes, and install dash cam. Now I put in the Storage tub under the back seats. Didn't come with it, and I saved 20% buying...
  4. rich weyand

    1977 400 timing specs?

    To really understand timing, the whys and wherefores, read this: http://www.gmsquarebody.com/forum/showthread.php?t=14508
  5. rich weyand

    (203 transfer) gear selection not accurate?

    The leather 12-way power seats on the Denali do my old bones good. And with a 4.65 first gear and 420hp/460ftlb, it gets right out of Dodge. No, there's a time for everything, and I enjoyed my time with Working Girl. Someone else's turn.
  6. rich weyand

    (203 transfer) gear selection not accurate?

    Hoo, boy. You mentioned me, Rusty Nail, which dragged me over here into this forum topic. Where the hell am I, anyway? To free up the NP203 shifter: Problem is, it hangs down there in all the mud and gets full of crap. First, get the hose out and hose off the shifter box from underneath the...
  7. rich weyand

    "Working Girl" post index & goodbye: I've bought a new truck

    I've been thinking about a 1936 LaSalle Series 50 four-door sedan body on a built-up, all new, tubular steel chassis, with independent suspension and a 400+ horsepower GM Connect & Cruise powertrain. :) And the FS ad for Working Girl is up in the Classifieds...
  8. rich weyand

    FS: "Working Girl" 1978 K10 RCSB Fleetside

    This truck has been my personal daily driver for the past seven years. Everything works, and all maintenance has been professionally done with best-quality parts. Most work was done at Extreme Performance in Bloomington, IN. Freshly detailed at Ackerman Detail Services in Bloomington, IN...
  9. rich weyand

    "Working Girl" post index & goodbye: I've bought a new truck

    Thanks for that. It's why I did it, and why I wrote such long answers, with the rationale behind them. All those answers over the past seven years are on the forums, and searchable within the forums or with Google. Hopefully they are a help to others in the future as well.
  10. rich weyand

    "Working Girl" post index & goodbye: I've bought a new truck

    Not sure. I have a tendency to pick up a hobby, work on it hard, learn a lot, and move on after five, ten, fifteen years. Life is short, and there is so much one can do. I may circle back, I may not. This is my second time through cars.
  11. rich weyand

    Just bought a 2017 Sierra Denali CCSB

    Yup. One big killer of gas mileage on the highway is that the throttle plate is almost closed, so vacuum is high, and stack velocity in the runners is down. DOD solves those issues. And unless you have the display on, you wouldn't know. I suspect it's noisier in V4, because the DOD has...
  12. rich weyand

    Just bought a 2017 Sierra Denali CCSB

    Took the new truck on a 575-mile loop last Thursday: Bloomington, IN to Naperville, IL, to Champaign, IL, to Blooomington, IN. Mostly Interstate driving at 76-77 mph indicated (figure actual is one to two mph slower, per the construction site radars), with some local driving in each location...
  13. rich weyand

    Just bought a 2017 Sierra Denali CCSB

    That's true. As for off-roading, it has yaw and pitch displays (angles L-R, and F-R) that can be displayed on the instrument panel. It also has a "steep hill descent" function that acts as a slow speed cruise control for going down hills. When turned on, it will maintain a speed between 5 and...
  14. rich weyand

    Just bought a 2017 Sierra Denali CCSB

    Well, it does have ABS, and traction control, and stability control, so the computer does mess around with the brakes to try to make it do what you are asking it to do -- stop, go, and go straight.
  15. rich weyand

    Just bought a 2017 Sierra Denali CCSB

    One other note. There are 2WD and 4WD Sierras/Denalis. None are AWD. The Denali version 4WD does have an "Automatic" mode, in which it runs the transfer case in 4WD, and then electrically locks the front hubs if you spin the rears. You can also run it in 2WD, 4WD, 4LOW, and Neutral for...
  16. rich weyand

    Just bought a 2017 Sierra Denali CCSB

    Yeah, it's the 6.2l L86. Kind of a no-brainer there. The L86 is standard on the Yukon Denali, I believe. but not the Sierra Denali. It says premium fuel is recommended, and that it won't get the same mileage and performance on regular. But the way it's worded, if there's no premium around...
  17. rich weyand

    "Working Girl" post index & goodbye: I've bought a new truck

    I didn't even know there was an Other Vehicles section. I never get up that way. Anyways, pics are posted: http://www.gmsquarebody.com/forum/showthread.php?p=341660#post341660
  18. rich weyand

    Just bought a 2017 Sierra Denali CCSB

    I picked it up this morning, and I've already made the first mod, a Revolver tonneau cover. And I also had them take the POS OEM tires off and put Michelin Premier LTXs on it. I can't help it. It's a sickness.
  19. rich weyand

    "Working Girl" post index & goodbye: I've bought a new truck

    Well, I know I can hang out here even without a square, but it's helping people out that makes it fun for me, and I don't have the reference vehicle to check stuff on. So I don't know. We'll see. No name yet. Those things take a while to gel. Actually, most of the posts were posted on all...
  20. rich weyand

    "Working Girl" post index & goodbye: I've bought a new truck

    Well, it's time to take my leave as an active participant here. I've bought a new truck, and will be selling Working Girl. I've just gotten to the age where I want (and need) the comfort and conveniences of a modern vehicle. I bought a 2017 Sierra 1500 Denali CCSB with the 6.2l. As I take...
  21. rich weyand

    Edelbrock clearance issues. (or go back to quadrajet)

    I used this to solve same problem: http://www.jegs.com/i/JEGS-Performance-Products/555/50071/10002/-1
  22. rich weyand

    save gas

    In this order: 1) Move the vacuum advance from ported vacuum to manifold vacuum. 2) Lean out the idle. 3) Advance the timing.
  23. rich weyand

    Timing??

    Here's some reading for you. http://www.gmsquarebody.com/forum/showthread.php?t=14508 Be interesting to see which vacuum can is on it. Look down at the bracket between the vacuum can and the distributor cap (use an inspection mirror or take a pic with the cellphone) and look for the markings...
  24. rich weyand

    Add a Tach

    The gmsports one comes out nice. I like the modern numerals in my 78 because they are larger. I moved the brake indicator lamp over to the other side. http://www.gmsquarebody.com/forum/showthread.php?t=10062 http://forum.73-87chevytrucks.com/smforum/index.php?topic=28547.0
  25. rich weyand

    Cam suggestions L31-R

    No, that's OK. What I really know is the flat-tappet cams for the SBCs. The BBCs and the roller cam stuff I don't have any experience with. But I'm happy to help with some pointers. Those sites I linked have all the discussion the OP could want.

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,339
Latest member
hauto85
Top