Search results
-
Age of our members
62 somedays I feel it others I'm 50ish!- hoagster
- Post #22
- Forum: Engine & Performance
-
What have you done to your square lately??
Thats ok they will have another sale! Just need to measure mine OEM one and bite the bullet! Thank you -
What have you done to your square lately??
I meant the Radiator part number, looks awesome. -
What is this wire for?
The info you need is in here! drill down to 1976 and look at the firewall schematic! My guess is a ground by the color. https://www.gmsquarebody.com/threads/1973-1991-wiring-manuals.14498/- hoagster
- Post #3
- Forum: Electrical & Audio
-
-
Need honest quote for this truck, not a I know what I have?
Might be a cow butt print! Moved a lot of cows for that family- hoagster
- Post #46
- Forum: Tech Discussion
-
Need honest quote for this truck, not a I know what I have?
Your welcome, nice to meet you and stay in touch! Glad I was there to help would have been very difficult to load it with out some of my toys!! And I was happy to help- hoagster
- Post #45
- Forum: Tech Discussion
-
What have you done to your square lately??
Can you elaborate on the Relocator. Part #, pictures etc. plz! -
-
SM465 / Clutch
As far as getting it out it is a heavy sob! I took mine out with the transfer case still installed using a floor jack and a cheap Harbor Freight transmission jack. Did it by myself but I wouldn't recommend it. Even with both items the combined weight smashed the transmission jack. I don't have...- hoagster
- Post #2
- Forum: Manual Transmission & Clutch
-
Spot Blaster
If you have a tractor supply try the media I suggested, I have zero problems with it.- hoagster
- Post #12
- Forum: Paint and Body
-
Hello from CA!
Try some never dull on it! And welcome from NorCal- hoagster
- Post #9
- Forum: Introduction
-
Spot Blaster
Tractor supply, Black diamond fine for media, the course won't work in either of those units. Just be prepared that stuff gets everywhere and make sure you get all of it out of every nook and cranny.- hoagster
- Post #10
- Forum: Paint and Body
-
cheap paint job options
New bed will have what they call and ecoat or edp on it if it's new. It will be black. You need to scuff that apply a coat of primer. Typically a direct to anything or a forever seal. Then you can shoot anything on it if you don't care! The base color is what is expensive. So Tractor supply use...- hoagster
- Post #5
- Forum: Paint and Body
-
cheap paint job options
Whats your budget and can you do it yourself?- hoagster
- Post #3
- Forum: Paint and Body
-
What have you done to your square lately??
Added final layer of primer to the doors, one more hit with 400 grit then Base and clear! No pictures this time you guy's have seen them already. -
-
Spot Blaster
I have the small handheld one also and it is good for small jobs. They both clog! The small one takes patience because the amount of media in the hopper. But it is something that you will always have a need for in the future. The trick for is to put a regulator/filter on your compressor and...- hoagster
- Post #5
- Forum: Paint and Body
-
Spot Blaster
You mean this china blaster? My whole project was stripped using it. Or are you talking about the small hand held one?- hoagster
- Post #2
- Forum: Paint and Body
-
Seam Sealer???
It says bare metal but if you look it up it can be applied to primer also. and 15 minute cure time to paint- hoagster
- Post #21
- Forum: Tech Discussion
-
Seam Sealer???
I used 3M also and it came out awesome. unfortunately you'll also need a gun.- hoagster
- Post #20
- Forum: Tech Discussion
-
Complete front axle rebuild kit….
Do some research i.e put the front end up on jack stands. Take the wheels off and inspect everything. Figure out what you really need. There are a few sites where yo can get every thing you need. Here's one site https://www.dennysdriveshaft.com/c718_dana_44_front_chevy.html- hoagster
- Post #8
- Forum: Suspension, Steering & Brakes
-
Hello all, here are my projects. 1978 crew cab dully and 1979 j
I guess we'll all see the end product! Welcome good start to both of them.- hoagster
- Post #23
- Forum: Introduction
-
Kicking around doing an LS swap
Here's another option if you use a np205 @ off road design that I'm kicking around still.- hoagster
- Post #18
- Forum: Engine Swaps (Gas) LS, Vortec, LT1 , etc.
-
