Search results

  1. gut_wrench_garage

    What size tires for 4 inch lift?

    I had a K20, years ago, with 4" and 33's. It looked good, I thought. I am fairly certain 35's would have looked better, and with some trimming, 37's. Wouldn't run those on a 44 or 10 bolt though.
  2. gut_wrench_garage

    ‘86 C10 Cargo light confusion. Help!

    You'll always have 12v. This is normal. The interior lights are switched at the ground. The switches themselves are in the door jambs by the hinges. When you open the door, they pop open and ground the bulb. Simple. One of them is probably damaged. Or both of them.
  3. gut_wrench_garage

    Questions about turning a Burb into a 4 door pickup

    Thanks for all the input everyone! The deal breaker here may be the inability to use a truck tailgate without having to graft on a whole truck bed, and... I genuinely don't want to have to do that. Plus, when looking closer, I saw that the ribs in the roof start behind the drivers seat, but on a...
  4. gut_wrench_garage

    Questions about turning a Burb into a 4 door pickup

    Pretty sure it was here, actually. Let me see if I can find the thread. https://www.gmsquarebody.com/threads/suburban-to-avalanche-conversion.6366/ I'm mostly concerned about having the equipment and skills, and figuring out how to cap the bed rails.
  5. gut_wrench_garage

    Questions about turning a Burb into a 4 door pickup

    Ah that would explain why one guy actually grafted on about a foot of pickup bed, with tailgate. It looked good. As much cutting as I'll be doing, that might not be a horrible route to take.
  6. gut_wrench_garage

    Questions about turning a Burb into a 4 door pickup

    The goal would be something like one of these: The reason? I need a pickup bed for carrying fuel and supplies. Don't want to carry them inside, and don't want to carry them externally or on the roof. The questions I have are related to the body work involved. Cutting, alignment, and what not...
  7. gut_wrench_garage

    88 Burb: Increasing Fuel Capacity

    Yep, have barn doors. I'll look for those brackets, might be a good compromise.
  8. gut_wrench_garage

    88 Burb: Increasing Fuel Capacity

    Really in the end I think it'll be simpler just to carry gas cans. I was hoping somebody knew of a relatively straightforward way to build, but it's not to be.
  9. gut_wrench_garage

    88 Burb: Increasing Fuel Capacity

    So, two 5g gas cans it is :D
  10. gut_wrench_garage

    88 Burb: Increasing Fuel Capacity

    So, this big burb needs more range. 40 gallons is good, but I'd like to have another 10 gallons somewhere. Yes, I could carry gas cans, but if I could stuff it somewhere underneath and then pump into the 40 gallon tank as needed, that would be pretty neat. Any thoughts as to using a tank from...
  11. gut_wrench_garage

    Locking Hub Body Won't Seal To Hub

    Ok here's the thing: with very little grease in the hub body, it wouldn't push in. It's not grease. Yes I may have overloaded it with grease, but that's not the mechanical issue that's keeping it from seating when there's hardly any grease at all. Everything is bone stock.
  12. gut_wrench_garage

    Locking Hub Body Won't Seal To Hub

    I checked, and it's there.
  13. gut_wrench_garage

    Locking Hub Body Won't Seal To Hub

    When I put this back together today, I actually squeezed grease out. And when I removed it, there wasn't much in there (which is why I was in there to begin with). So I really don't think that's the case. I wish it was that easy.
  14. gut_wrench_garage

    Locking Hub Body Won't Seal To Hub

    Thanks for the replies guys. I'm glad to hear I'm not the only one who's had this problem. I'm strongly considering a pair of new Warn hubs for it. About $160 for the premium ones is not too bad. I figure the hubs are just worn out but I don't really know. And now with one of the bolts broken...
  15. gut_wrench_garage

    Locking Hub Body Won't Seal To Hub

    Hey everyone, for as long as I can remember, this hub has been leaking a little. Recently it's been leaking a lot. I thought the bolts were loose, so I tightened them. One of them snapped. Well, that wasn't it. So today I pulled the hub out and repacked more grease in there, and then...
  16. gut_wrench_garage

    Second time squarebody owner, looking for some help I’m only 35 one year younger than my truck

    If I remember right, that goes to the brake light switch, right above the brake pedal. I could be wrong, and probably am.
  17. gut_wrench_garage

    I want to drive an '89 suburban 700 miles home, what should I know?

    I drove my 88 Burb from near Olympia WA to Fernley NV, fully loaded with all of my personal belongings in the rig and in a 8x12 UHaul trailer. I've been tracking mileage since the move last year: It's my daily driver. If I were to buy a Burb sight unseen and drive it 700 miles, I'd...
  18. gut_wrench_garage

    I bought a 1984 and don’t know what to do???

    I like the old saying "Run what ya brung!" in other words just keep what you have, work on one thing at a time. If you can, spend some time going around the truck and make a list of things it needs, and then prioritize that list. Then, one thing at a time. New carb is great and all, but what...
  19. gut_wrench_garage

    1991 gmc suburban stock shock question

    I came here to ask the exact same question. It's time for shocks. One of the drivers front shocks let go. Can't really tell, as the other still works. Got a weird oily substance on the driveway one day, then it stopped! They're old yellow shocks that have probably been on there 20 years. I'm...
  20. gut_wrench_garage

    New Guy with the wife's Burban

    Sounds like you've got a couple of keepers: The wife and the rig! Welcome.
  21. gut_wrench_garage

    Ladder Rack as Roof Rack on Suburban?

    This became moot when my buddy who helped me move it home decided it would go better on his F-150 pickup, so no we'll be widening it to fit his truck! He can use it for work, which is cool with me :)
  22. gut_wrench_garage

    Ladder Rack as Roof Rack on Suburban?

    I don't have photos, but... squarebody suburban with a ladder rack turned into a roof rack. It would have to be modified of course, but the free one I have access to looks about like this, stolen from Google Images...
  23. gut_wrench_garage

    Ladder Rack as Roof Rack on Suburban?

    Hey everyone, has anybody seen or used an old ladder rack as a roof rack on a squarebody Suburban? I'm picking one up for free- I can use the steel for lots of things regardless, but this seems like an easy way to get a roof rack onto the burb. Or would it look really dumb? Opinions, thoughts...
  24. gut_wrench_garage

    Low oil pressure but engine runs great

    Could this be the reason my truck sometimes starts immediately, and sometimes cranks for a long time? That sounds like an easy fix...
  25. gut_wrench_garage

    How much does your square body weigh?

    Burb, stock on 31's, half ton. 350, 700r4, 208. Empty w/o me in it, about 5800lbs.

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,186
Members
43,338
Latest member
jw23655
Top