Search results

  1. kkgp81

    Door brace tab?

    I wouldn’t say more challenging, it’s actually easier to fix the crack than the broken tab. One requires paint though.
  2. kkgp81

    Door brace tab?

    the one side is broken but it may not actually affect anything. You will need to put the screw back in place though. A lot of people don’t/didn’t over the years and that’s why you see a crack on the outer door in that area from mirror flex.
  3. kkgp81

    C30, 85 with a narrow dually

    This one was for sale near me a while back. Almost picked it up but life was not aligning. There is a ford dent side near my house with a very similar setup.
  4. kkgp81

    Is there a reliable source for dually fenders?

    Currently exploring 2 options Another truck in and strip Bite the $800 bullet for a single fender or the $1200 for a pair. Ordered parts to try to get it streetable first and see if it’s actually a unit. I guess in the move the trans wasn’t bolted in. Seems to be some flex plate size drama...
  5. kkgp81

    FOUND - 5.0 / 305 Core or rebuildable engine 86-87 / 87-91

    Man, I wish you had posted this last week. I had 2 of them on the scrap trailer that were heavy smokers when pulled. Lemme ask the guy I sold the 87 I had if he’s pulled the motor yet.
  6. kkgp81

    Is there a reliable source for dually fenders?

    The funny thing is freight doesn't scale. Its still in the 500-600 range from the 1-10 range in fenders. So I guess if I could find 4 other peeps that need a set of fenders shipping wouldn't be that bad in Texas. :laughing1:
  7. kkgp81

    Is there a reliable source for dually fenders?

    LOL I tried it already. Truck freight not included.
  8. kkgp81

    Is there a reliable source for dually fenders?

    Nah, not for me. And I have bought a set of steel stepside fenders, they are close but they aren’t the same. The front cut on them for the step is kind of the deal Killer with them. The ones linked above will do. ETA- I guess the search continues. Woof on that shipping cost! It’s the...
  9. kkgp81

    Is there a reliable source for dually fenders?

    Thank you a ton! Didn’t even consider classic.
  10. kkgp81

    Is there a reliable source for dually fenders?

    Looking to pick up a dually and I keep running into damaged fenders. I haven’t found a source for aftermarket so is there one? I also keep up a search within 200 miles and no luck.
  11. kkgp81

    Bluetooth alternatives

    I did this in the last one. It works flawless and is an ok setup but after using it a while some things I hate is you cannot adjust front/back/side and its one for all on the speakers. I did a factory delete place on the radio face and used magnets to put it behind the dash...
  12. kkgp81

    Need a Drivers side front diff/axle setup ....

    True on that, it would lose the fun things that that transfer case setup is capable of.
  13. kkgp81

    Need a Drivers side front diff/axle setup ....

    You can get a Pass drop NP241 to fit that setup and keep it on the pass side. You will need one out of up to a 90/91 blazer/burb as it will have the digital speed output setup.
  14. kkgp81

    Rear speakers for K10 with 3 point seatbelt

    Here with the same search. Normal corner setups will not fit due to the mid-way up the door mounted retractor that Hucked posted. Currently considering just throwing a couple of small boxes in behind the seat. I am considering just putting the speakers that the original owner of this...
  15. kkgp81

    Lets see you custom interior rear panels

    If you are on an iPhone you can reduce the size to get them to upload. Bottom left has 3 dots Click on them and this pops up Click on options and knock the size down
  16. kkgp81

    C10/k10 seat- same or different?

    Took a pic- maroon is an 84/85 seat, tan is a 78 seat
  17. kkgp81

    C10/k10 seat- same or different?

    Same, you have a difference in the 73-80/81-87 though. I think it's the foam thickness but cannot remember. You also have a difference in the slider handle with the 73-80 being on the side and 81-87 being in the front.
  18. kkgp81

    1980ish K10 3 lights then 1 light on press

    This reinforces that you need to check your grounds.
  19. kkgp81

    1980ish K10 3 lights then 1 light on press

    Grounds and possibly a wrong bulb. If you haven't replaced a bulb then for sure check the grounding. If your ground attachment on the firewall is on the parking brake pull the bolt and clean up the connections
  20. kkgp81

    What are these for?

    On my Red longstepper thread I ran into lighting issues with the cluster. The largest problem turned out to be the connection to the firewall. On the red truck it was tagged onto the parking brake and I only happened to catch it on complete accident when I drove the truck home at night...
  21. kkgp81

    Check out these old seats in a 77/78 Burb

    That was just a burb I bought the doors off of for my K30 project.
  22. kkgp81

    Looking for bench seat options with a foldable back / armrest

    I got my daughter some TMI seats and they worked out pretty well and look good. LMC sells the exact same seat/console for a little cheaper these days. Overall not a CHEAP solution but a solidly good solution. Somewhere around 2:34 of this video
  23. kkgp81

    77 trim clip source

    Looking for a source for the body trim clips for a 77 upper/lower trim. I already called AMD as they sell a full trim set with clips but they do not sell just the clip set.
  24. kkgp81

    Beauty Rings/With or Without

    +1 for the rings. Also, there are different rings for 15x7 and 15x8’s.
  25. kkgp81

    Factory style engine harness

    Honestly, your best bet is to reach out to NewBoyz square body rescue and see if they have one. If not you may be able to send your harness in for a rebuild. I didn't get a clear answer if they are doing rebuild work when I asked but it kinda read that they are willing to do it. I have 3...

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,185
Members
43,338
Latest member
jw23655
Top