Search results

  1. nvrenuf

    Cooling suggestions k5 454

    Just my opinion…. Use an 83 K30 w/ 454 as the application to shop for parts. Get a factory 4 row radiator and matching shroud then a 7 blade fan with a severe duty fan clutch. The fan is located at the same height for SBC’s and BBC’s but the distance between the fan and radiator is different...
  2. nvrenuf

    BBC 396 wil not idle with any carb

    There’s no reason a choppy cam’d engine wouldn’t idle around 800 or so.
  3. nvrenuf

    What have you done to your square lately??

    @Sgt Gus I appreciate the suggestion! Unfortunately, the hole is the shape of the upper window frame on the door so it's kind of a rounded trapezoid.
  4. nvrenuf

    What have you done to your square lately??

    Yeah, the plan is for the windows to work however, at the moment, they don't. I'm waiting on some belt moldings and small parts from LMC. I also need to spend some time fab'ing a bracket to go inside the door for the rear caps to screw to and I'll attach the rear window channel to that. I may...
  5. nvrenuf

    What have you done to your square lately??

    I finally worked up the nerve to cut my original doors. I really like my tube doors but I'm liking this look more.
  6. nvrenuf

    AFR gauge installation

    No, this one is just a wheeler. The cage is because it’s a full top but some of its parts are from my last truck that was a wheeler + deep pit racer.
  7. nvrenuf

    AFR gauge installation

    Forgot my pic, I used both holes.
  8. nvrenuf

    AFR gauge installation

    Ok. If you weren’t using the a/c vent I’d say install the gauge in that hole using some rough textured plastic (Lowe’s and HD carry it). You could do the same with the radio hole. The only other alternative is to put it on the column or hanging along the bottom of the dash.
  9. nvrenuf

    AFR gauge installation

    Does your a/c work? If not, are you going to fix it?
  10. nvrenuf

    What new tools have you got lately?

    I want one of those cabinets but, like you said, they’re always expensive.
  11. nvrenuf

    Did GM use Spicer parts from the factory?

    More spines is typically stronger, the higher 30 spline inner axles were in the last few years so you should have them.
  12. nvrenuf

    Did GM use Spicer parts from the factory?

    As far as I know, Moog is just an aftermarket replacement parts brand. Your front axle would be a GM 10 bolt which I believe is built by American Axle Manufacturing.
  13. nvrenuf

    Did GM use Spicer parts from the factory?

    Post up what the truck is and we can tell you what would have been in it stock. We can also help identify what you have now, if needed.
  14. nvrenuf

    Did GM use Spicer parts from the factory?

    Spicer "parts" ? Yep, lots of them too. Spicer = Dana so... All of the '78-ish and older 1/2 and 3/4 ton trucks, Blazers & Subs had Dana 44 axles. All '77+ 1 ton trucks had a Dana 60 front axle. All pick up dually trucks used a Dana 70HD rear axle. Spicer also manufactures and/or...
  15. nvrenuf

    Radiator/Shroud swap '90 to '86

    What body style is the '90? Is it square or the newer GMT400 body style? If the '90 is a square body the parts will interchange assuming they are of adequate size for your needs (350 vs 454, etc). If it's a GMT400 then it's very unlikely the parts will fit.
  16. nvrenuf

    What year bed is this

    Gas doors are 78~79+. I’m not sure what year the tailgate logo changed from centered to the right side but I believe it was around 81. I don’t know of any other ways to identify the year of a bed.
  17. nvrenuf

    Shifter Knob

    Sorry no, it’s a keepsake from my old truck.
  18. nvrenuf

    Shifter Knob

    For the sake of documentation, this knob came in my ‘80 K10
  19. nvrenuf

    Shifter Knob

    There was another style between those 2 that was sort of mushroom shaped, I’ll post a pic in a bit.
  20. nvrenuf

    SM465 will not go into 2nd

    The gravel sound while moving in 2nd isn’t normal. The very low volume rattling at idle with the clutch out could be the throw out bearing moving a bit (my 06 Dodge does this sometimes) however if it’s loud it’s a problem. The sm465 transmission does not like or want to downshift into 2nd...
  21. nvrenuf

    350 to 454 swap, 73 c30 questions

    The p/s pump brackets are different. I’m 99% sure the fuel pumps are different, the arm is different if memory serves correctly.
  22. nvrenuf

    Car Hauler tips/tricks/ideas

    That reminds me, I need to go put my covers on.
  23. nvrenuf

    What gears

    It’s a direct bolt in except for the ubolt hardware.
  24. nvrenuf

    1987 k30 manual transmission, transfer case, installed in a 1974 k20 .

    If they are both pick ups and the same basic ride height, it should fit. If the K30 was a cab & chassis truck then you'll have to install everything and break out the tape measure.
  25. nvrenuf

    Whats your opinion these welders?

    For future buyers.... Any feedback on Eastwood products?

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,186
Members
43,338
Latest member
jw23655
Top