Search results

  1. Ontheboulder

    What have you done to your square lately??

    Finally got my glue for the headliner, sprayed it on and the headliner looks great, just waiting for better weather before install!!
  2. Ontheboulder

    New member in Arizona 87 k20

    welcome aboard from the frozen boulder! here is my 87 GMC
  3. Ontheboulder

    Front frame bent?

    my guess is the passenger side has a definte bow in it
  4. Ontheboulder

    Brake size 11" or 13 ?

    my 87 has the 11" brakes,full float 14 bolt
  5. Ontheboulder

    Tools for trip

    I wouldn't put any tools on any plane nowadays!! just hit up one of the local Oriellys or autozone for a cheap tool set,maybe a cheap bottle jack or floor jack for a flat tire. Belts, hoses,oil and the necessary stuff. maybe even a cheap tow strap if someone may be nice enuf to pull to the next...
  6. Ontheboulder

    What have you done to your square lately??

    With this headliner shaped like a bowl, is it better to start in the middle like you said and go front to back or left to right
  7. Ontheboulder

    What have you done to your square lately??

    Working on the head liner in the 87 GMC. All cleaned up and waiting on the adhesive to get here. I'm gonna use bachelor buttons for inside. Anyone ever done one of these? wondering which way to start from when I lay down the glue and start pressing down the fabric- front to back or left to...
  8. Ontheboulder

    Can I run 35s on the street with this setup?

    Why??Just Why?
  9. Ontheboulder

    Advice on my 57 chevy

    should be able to get 10-20 thousand out of it without doing a thing
  10. Ontheboulder

    HF plastic welding kit

    I have done this before, use a good 2 part epoxy, v groove the cracked area and drill the hole at the end of the crack. Then clean and lightly sand down the plastic 2-3 times larger than the crack area then wipe down with rubbing alcohol and epoxy the whole thing. Make a mark in an area that you...
  11. Ontheboulder

    What have you done to your square lately??

    Merry Christmas to me! Got the GMC fired up and out of the shop! Still got somewhat of a idle issue but it seemed to clear up after a few minutes of running. Not sure just what is causing that.
  12. Ontheboulder

    Merry Christmas!!

    Merry Christmas!! Enjoy yourselves!
  13. Ontheboulder

    Champion radiator difficulties

    Had the same problem on my 87 GMC. I had to revamp the lower saddle mounts on the bottom then cut away the upper mount on the passenger to allow for clearance of the cap. After a few phone calls I found out that these radiators are just a bit different and require some mods to fit in.
  14. Ontheboulder

    What have you done to your square lately??

    Got my aluminum hoop steps installed, cold day on the Boulder! Thinking tomorrow will be a good day to fire up and move outside so I can get to work on the head liner.
  15. Ontheboulder

    whooshing sound from under the dash when I press on the brakes

    Thanks for the picture, mine has 2 vac lines 1 big and 1 small which goes to the vac ball and the big one goes inside the cab. My cruise is disconnected so no worries on it working but just want the brakes to be good.I did hit the brake pedal hard a few times thinking of the proportioning...
  16. Ontheboulder

    whooshing sound from under the dash when I press on the brakes

    Thanks!! I bet that is it, cause I was knee deep under the dash last year,never noticed anything
  17. Ontheboulder

    whooshing sound from under the dash when I press on the brakes

    thanks! the booster is original I think! why would the noise go away after a few pumps on the pedal ??
  18. Ontheboulder

    What have you done to your square lately??

    I got the headliner out of the truck for repair,repaint the trim plastic and new dome light set up. anyone done any upgrades to their dome light??
  19. Ontheboulder

    whooshing sound from under the dash when I press on the brakes

    I am getting a whooshing sound from under the dash when I step on the brakes, it goes away after i pump the peddle a few times. Any ideas?? 1987 GMC V2500.All the brakes are new with zero miles on them,new calipers and rear wheel cylinders as well as new master cylinder!
  20. Ontheboulder

    bulb socket for transfer case shifter cover.

    yup just trying to see if i can find one online someplace
  21. Ontheboulder

    bulb socket for transfer case shifter cover.

    no but its the light that plugs into the plastic cover on the floor with the boot and transfer case gear indicator
  22. Ontheboulder

    Should i fix the TBI or go to carb? And what's this wire?

    I just rebuilt my TBI, first one I ever did,very simple and it fired right up! got a sensor or something giving me fits but overall it was a simple job.
  23. Ontheboulder

    TBI idle

    THANK YOU!
  24. Ontheboulder

    TBI idle

    not sure how to do that! any help?
  25. Ontheboulder

    TBI idle

    coolant is full,coolant sensor is new

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,338
Latest member
jw23655
Top