Search results

  1. Ken B

    Trans Linkage parts

    Sorry hard to get a pic. I am trying to reinstall the trans linkage. the cotter pins/hair pins are easy enough to find, but the spring and coned washer to keep the spring in place....any ideas where I can find these items? My big feet smashed the spring
  2. Ken B

    Extra wire connections

    as my son reminded me.....you started this a few years ago...when you gonna be done? Maybe I shouldnt walk away so LOOONNNGGGG
  3. Ken B

    Extra wire connections

    big fan of the walk away method.....clear the head, work or worry about something else
  4. Ken B

    Squares since I was in diapers

    welcome from Indy. nice lookin truck
  5. Ken B

    Brake Pedal Slow to return

    thanks. anziously awaiting the UPS man tomorrow. will throw in a new master and bleed and pray that fixes it...
  6. Ken B

    Brake Pedal Slow to return

    good point , no offense. I will listen to all ideas. i will be very well acquainted with all brake parts by the time I get this done. Just pulled the radiator, shroud and fan to check prop valve. the plastic "switch" in the prop valve doesnt want to come out I am skeered I am gonna snap it...
  7. Ken B

    Brake Pedal Slow to return

    I did bench bleeding. I tried to reinstall old master. Got a new one arriving tomorrow. No visible leaks all new lines. Prop valve may be adding to the issue. Thanks.
  8. Ken B

    Brake Pedal Slow to return

    What could be the cause of the brake pedal slow to return while trying to bleed the brakes? Bad Master CYL ? No vacuum booster.
  9. Ken B

    New to the forum.

    Some are on the shelf
  10. Ken B

    New to the forum.

    My opinion is usa1 Industries...good quality but backordered as hell....long wait to get some partS.
  11. Ken B

    Brake Issues - RPO codes

    And if that is missing.? Thanks for the reply
  12. Ken B

    Brake Issues - RPO codes

    where can i find the brake codes....? while i am working on all this stuff I want to document somehow and keep it so I dont have to hunt for it .......
  13. Ken B

    is it common to not get much if any bubbles from the front reservoir while bench bleeding a master cylinder

    moving forward i have all new lines and as I am bleeding the fluid is very brown/rusty looking prop valve and booster/master are the only old parts. maybe I need to replace master?
  14. Ken B

    is it common to not get much if any bubbles from the front reservoir while bench bleeding a master cylinder

    I found a proportioning valve tool that you remove the switch/plug for warning light and screw in this tool to reset and allow flow to be restored. 9 bucks on amazon....either that or bench bleed master is what my limited research has led me to
  15. Ken B

    is it common to not get much if any bubbles from the front reservoir while bench bleeding a master cylinder

    reading old thread and looking for info. I am bleeding brakes....all new lines , new calipers, had master and booster off a couple of times. very little movement on back brakes removing air or displacing fluid. As i pump the pedal , with bleeder open it still seems to pump up and hold pressure...
  16. Ken B

    Hi! I'm taking my C10 home tonight.

    Welcome from a fellow Hoosier. Lots of good people in here to ask questions and learn from. I am usually the one asking questions and learning....
  17. Ken B

    Here we go

    Full do over.....swapped cabs....changed motor.....sound deadening in cab. Was a rust bucket. Lots of replacement GM sheet metal
  18. Ken B

    Here we go

    I am on the other side of the road....trying to get things back together. Amazing what you find under a seat and floor mats.....
  19. Ken B

    Door Speaker Depth Clearance

    I used leftover sheets and kept all the scrap sound deadening from cab floor and firewall and did doors and just the knuckle rap test was a huge difference. It's not 100% but much improved
  20. Ken B

    81 Sierra Grande Dash Script

    Oops sorry. Didn't know that wasn't available
  21. Ken B

    81 Sierra Grande Dash Script

    I just got a Scottsdale emblem from usa1. Looks good to me
  22. Ken B

    New to the forum with alot of questions.

    Lots of answers can be found here. There are great guys here who know a ton...welcome and thank you for your service in the navy
  23. Ken B

    1986 Rare Build sheet? Tell me what you think!

    Great looking stepper. I hope mine will be as good looking one day
  24. Ken B

    Rocker save

    art vandelay...i know that name from somewhere ....lol
  25. Ken B

    What master cylinder and booster do I get?

    keith you are wealth of information....Thanks for sharing your career experience and knowledge. keeps us rookies outta the weeds

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,186
Members
43,338
Latest member
jw23655
Top