Search results

  1. ali_c20

    GM compass install

    That's bad, I have 2 of them since a couple of years and no leaks.
  2. ali_c20

    New Guy from RI

    Welcome from Austria.
  3. ali_c20

    New to the old school!!

    Welcome from Austria. Nice truck.
  4. ali_c20

    Where's the resistor in the coil pink wire from ignition switch?

    When it has a small body/cap HEI it has a separate coil. The HEI with the coil in the distributor uses full 12V. IDK is it the same for the small cap HEI with external coil? I think I add more confusion than anything else.. :D
  5. ali_c20

    Where's the resistor in the coil pink wire from ignition switch?

    It's the wire if my memory serves me right.
  6. ali_c20

    New here

    Welcome from Austria.
  7. ali_c20

    Hi from Ghent, Belgium

    Welcome from Austria. Sweet rides.
  8. ali_c20

    hypothetical, mpg

    Welcome from Austria. Wide tires are not good for mileage. 3.73 gears are also not great. A diesel and a 5 speed manual trans would give you best mileage.
  9. ali_c20

    To seal or not to seal rockers

    Drain holes and fluid film. I use FLUID FILM Liquid AR in rocker panels. You have to heat it up to ~115° before you spray it in. Viscosity is like thick honey and it should last ~15 years.
  10. ali_c20

    '89 K5 Blazer

    Welcome from Austria. Got pics?
  11. ali_c20

    Which Master cylinder......mismatched parts

    Brake pedal is for the hydroboost? Forgot to ask this in my first post I would put everything together and test it on a remote stretch of street or a big parking lot. Or go to a shop that has brake testing system. You can add an adjustable prop valve additional to the existing proportioning...
  12. ali_c20

    Which Master cylinder......mismatched parts

    The right proportioning valve gives the right brake bias. Master cylinders just puts out the pressure, proportioning valve reduces the pressure to the rear. What was the drum size on the original K20 axle? Is your proportioning valve working? Do you have the proportioning valve of the donor axle...
  13. ali_c20

    New

    Welcome from Austria.
  14. ali_c20

    Plow Truck Gone Wild

    Welcome from Austria. Good work!
  15. ali_c20

    Hello From British Columbia

    Welcome from Austria.
  16. ali_c20

    Lurker from Ohio

    Welcome from Austria.
  17. ali_c20

    I made custom polyurethane radiator mounts

    Mine is an 74 C20.
  18. ali_c20

    I made custom polyurethane radiator mounts

    Nice. Using 81 up brackets was my first idea but the core support is too different on the pre 81 trucks.
  19. ali_c20

    1987 surburban

    Welcome from Austria. Fix it, drive it.
  20. ali_c20

    84 Chevy K10 computer controlled carb wiring

    I've never seen a new harness that supports CCC or factory TBI. Junkyard,ebay or a member here has one for sale.
  21. ali_c20

    Alcohol and Ebay don't mix....

    Welcome from Austria. Couple of friends and I bought a 68 Catalina after too many bottles of Gin in Poland. Was running and driving like the ad said but only for 50 yards before 3 cylinders opted out. When we wanted to push it in the shop after 3 yards the brakes seized. Interior is nice.
  22. ali_c20

    Hello from Missouri

    Welcome from Austria.
  23. ali_c20

    LMC vinyl headliner vs USA1 perforated vinyl headliner

    I have the usa1 perforated vinyl headliner. Not in the truck yet as projects times always explode on my projects Can't say anything bout fitment but quality, look and feel is great.
  24. ali_c20

    Hello from Dallas

    Welcome from Austria.

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,339
Latest member
wonone
Top