Search results

  1. Chevy 88

    Any tricks to getting your SB doors to close easier?

    Alright - just spend an hour or so working on it. Passenger side: installed 1/2 PCV (all i had on hand). Result: A-mazing difference! Welp, that side is fixed! Sweet! Driver side: added PCV, lots of hinge adjustments, several shims, several striker adjustments, hammer, etc. Result: About 50%...
  2. Chevy 88

    Any tricks to getting your SB doors to close easier?

    Would rubber hose work? Probably needs to be plastic, no?
  3. Chevy 88

    Any tricks to getting your SB doors to close easier?

    Should I just buy these? https://www.amazon.com/dp/B0D821N7LL/
  4. Chevy 88

    Any tricks to getting your SB doors to close easier?

    Cool, thanks everyone for the info - I will try to fab us some plastic for the strikers. Anything else I should try?
  5. Chevy 88

    Any tricks to getting your SB doors to close easier?

    Door bushings are OK. Plastic is gone, but the stikers are greased. Does the plastic help?
  6. Chevy 88

    6.7 Cummins Suburban Build

    If you don't mind my asking, how much are you into this truck so far?
  7. Chevy 88

    Need a breather for my 1987 7.4L "N", ideas?

    If all else fails:
  8. Chevy 88

    Any tricks to getting your SB doors to close easier?

    Gotta slam the doors on the K5 to get them to close. Its annoying. I tried messing with the door seals, adjusting the striker, lubing everything, etc. No luck. Thoughts?
  9. Chevy 88

    Spare tire mounted under the front bumper?

    I need a spot to mount my 37" spare tire, preferably outside the vehicle. Any ideas? Has anyone seen this before (tire mounted under front bumper):
  10. Chevy 88

    K5 bed floor level under carpet

    Padding would "reduce" the number of imperfections in the appearance of the rubber floor lining. It would also reduce noise in the cabin.
  11. Chevy 88

    Hello and help please

    I had a dome light bulb issue once on an older rig. This was the solution:
  12. Chevy 88

    Rough country lift

    Ya, I think I'm around 20 - 25 if memory serves. Lower pressure does help. I wonder how much handling control Im losing with that low of pressure. Any insight?
  13. Chevy 88

    Manifold and ported vacuum

    I looked into this a lot! I read lots of info on various forums. Answer: Try one, then try the other. use which ever one you like the best. If they both seem the same, then just leave it where ever it landed and move on.
  14. Chevy 88

    87 y-pipe

    Might now work in your situation, but you may need some speed dents. I paid some guys to install a lift kit on my truck, and half way through the install, they said that I needed to take my rig to an exhaust shop to get the exhaust modified in order for the lift kit parts to fit. What? I went...
  15. Chevy 88

    Hello and help please

    I would take it to the auto parts store and say "I need one of these". They should be able to match it up in size, shape and electrical connection.
  16. Chevy 88

    Rear Sway Bracketry Mod

    I dig the cardboard mock up. Good stuff.
  17. Chevy 88

    REDS NECK REPARES!~

    All comments are welcome and will be taken into consideration.
  18. Chevy 88

    Hello and help please

    Well, technically he owes this guy for the light bulb:
  19. Chevy 88

    REDS NECK REPARES!~

    For a stop leak, they do make this - and its a fantastic product that usually works very well. But not in this case.
  20. Chevy 88

    REDS NECK REPARES!~

    Swapping axles soon, no desire to repair this one properly. Just want a bandaid get me by.
  21. Chevy 88

    Hello and help please

    What are the numbers on your old bulb?
  22. Chevy 88

    REDS NECK REPARES!~

    The nail is an imitative idea. So you remove the brake line from the wheel cylinder, install a shortened nail into the brake line, and then reinstall the bake line. That's all there is to it?
  23. Chevy 88

    REDS NECK REPARES!~

    That's not a bad idea, but you would have to drain the fluid from that chamber or the plug would blow out. But ya, that would work. I'm curious about that nail idea. Could it damage the cone on the slave cylinder? Although I guess that would not matter, since it would be replaced during the...
  24. Chevy 88

    REDS NECK REPARES!~

    Wow, lots of good info! Thanks. I will try some of these as a temporary fix. Per your advice, I will not add any lubricants or anything. Thanks again.
  25. Chevy 88

    I'm stumped! Looking for BENCH seat sleeves for seat belts.

    For mine, I wrap a cable around the bottom of the buck, and then attach the other end of the cable to a small rag. Then I stuff the rag between the seat and seat back, and it holds the buckle right where I want it to stay. Not sure if this would work for your setup, but it may be a temporary...

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,173
Members
43,337
Latest member
kfrdavid
Top