Search results

  1. Georgeb

    does anyone know of anyone still making MT 33x12.5x16.5 tires

    If you like your steel wheels why not just find some 16" wheels?
  2. Georgeb

    George's 2003 Sub "lucky7"

    I think they moved it to the door in 03. Prior to that I believe there was a reciever in the dash somwhere near the right side.
  3. Georgeb

    Bvllsh!t on craigslist.

    this is neat. http://milwaukee.craigslist.org/cto/5952662720.html
  4. Georgeb

    Starter clicks then nothing...

    and the big question....... Were is the OP?
  5. Georgeb

    Monroe shocks

    Agreed, the N2 charge is probably gone.
  6. Georgeb

    New Member

    When I see your handle my brain says "Wide F#%kn Open"....
  7. Georgeb

    Starter clicks then nothing...

    Do you have a ground cable going to the alternator bracket.
  8. Georgeb

    Dash Redoing question

    For what it's worth I have had really good results with this stuff.
  9. Georgeb

    Monroe shocks

    More truck like in a good way. The Blisteins allowed for quicker compression of the springs so it absorbed the road a little better. But small movements allowed for a bit of bounce but not a bouncy ride. More like when I would stop the truck they allowed for a bit more weight transfer and then...
  10. Georgeb

    New

    Nice!
  11. Georgeb

    Monroe shocks

    Don't get me wrong, they worked well when on really rough roads and they did a good job keeping the truck under control but when I loaded up for camping and towed the boat or hauled 2,000 lbs of fire wood in my trailer I had more suspension travel than I wanted. I am by no means bad talking them...
  12. Georgeb

    Monroe shocks

    I replaced the Blistiens that were on my 03 Burb with heavy duty Monroe shocks and like them much better. FWIW
  13. Georgeb

    Monroe shocks

    I have been running Monroe shocks for years now with no complaints. Just don't buy the cheapest ones. Gabriels gave me trouble.
  14. Georgeb

    Different approach for dash pad resto. Opinions please!!

    This just popped into my head but wouldn't carbon fiber look sweet!
  15. Georgeb

    Different approach for dash pad resto. Opinions please!!

    Having body work in my background and having worked on several glass bodies on some race machines. I think your idea is very valid. I have entertained this idea as well. Using a good gelcoat should allow for some flexing during the install. Get R Done!
  16. Georgeb

    Left blinker

    Check the ground lead for the parking/turn signal socket on that side. Parking light power comes from the brown wire, turn signal comes from the light blue. The side marker gets its ground through the turn signal bulb when the parking lights are on and the light will go out whenever the turn...
  17. Georgeb

    George's 2003 Sub "lucky7"

    Took it in to the dealership. The tech plugged in and checked for the lates version of the software in the module for the RKE. The reman module had the correct version and indicated that fob 2 was programmed but it would not retain the fob 1 program. He installed the original module, updated he...
  18. Georgeb

    Tail lights but no Brake Lights

    Do your turn signals work for both sides in the rear?
  19. Georgeb

    Surging Idle: Thinking out loud

    You can make a cable and get software pretty easily.... http://www.gmsquarebody.com/forum/showthread.php?t=13194
  20. Georgeb

    Bent wiper

    I can't picture how its bent. Got a pic?
  21. Georgeb

    Surging Idle: Thinking out loud

    The rattle from the IAC is normal. The next thing I would look at is the TPS. It may have a dead spot. Another culprit could be a worn throttle Body shaft or the hole where it passes through the body.
  22. Georgeb

    Carburetor Problem

    Try to post some good up close picks of the choke linkage setup. Also tell us the part number on the carb. Should be an 8 digit number starting with 17. The choke won't be too bad to get working. After that you can get on with tuning things a bit.
  23. Georgeb

    Renwed Interest In My "Square Body"

    Welcome.
  24. Georgeb

    New Member

    Nice truck!!!
  25. Georgeb

    Steering Gear Box Adjustment

    Should be good. Installation isn't too bad. You will need a socket that will Fit the large nut for the pitman arm as well as a pitman arm puller. If you are planning to reuse the pitman arm you may be able to pull it off the old gear without separating the other end from the steering linkage...

Latest posts

Forum statistics

Threads
48,426
Posts
1,067,301
Members
42,822
Latest member
Brianall
Top