Search results

  1. Crispy

    Suburban sub box design and locations

    Mount the amp under the 2nd row then run speaker line from there to where you want to keep them, either behind the 2nd row or 3rd row if you have it. Use banana plugs or quick disconnects on the sub box speaker wires. Now you can quickly take the box out and you saved a bunch of money over going...
  2. Crispy

    Updated headlamp harness

    Harnesses are so cheap nowadays that buying a generic prebuilt one on ebay or amazon will be under $10. Depends on if the cost is worth your time. Also depends if you can source just enough material needed for the project. Chances are you will spend more than $10 on 2-3 relays, a short spool of...
  3. Crispy

    Interior Rear View Mirror

    If you arent going period correct then any modern era (late 90's up) mirror would serve nicely. Gentex is a major manufacturer and adding any wiring is as simple as power (or switched source) and ground for auto dimming. Map lights and temp would be another bit of wiring but thats pretty...
  4. Crispy

    Deformable LED Garage lights anyone?

    Good to know. I figured there would be other sellers offering them. Once I get settled in better I want to get some mounted a few feet up from the ground on a wall or two. Excuse the mess, still trying to move in little by little.
  5. Crispy

    Deformable LED Garage lights anyone?

    Those deformable lights are cool but pricey in a cost/output sense. I paid $60 for two of them from amazon (they are cheaper now https://www.amazon.com/gp/product/B07G36R76D/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1) and installed them in my garage. Super bright but I dont use my garage...
  6. Crispy

    SOLD 1987 k10 suburban for Parts *All Gone*

    Just wanted to let everyone know that Vince is a stand up seller. He went above and beyond for the little piece I needed and was honest about shipping charges. Professional, safe, payment method also. We need more people like this doing business.
  7. Crispy

    2001 suburban

    Did you get the remote start situation squared away? If not, its not stock. No OEM remote starts were offered on GMT800's. Its a base level aftermarket unit. You can disable it by looking under the dash for a small toggle switch like this: When I worked at a shop we wouldnt drill them...
  8. Crispy

    Snow tires for lifted trucks

    I've been very happy with the cooper discoverer ST Maxx. I have them on my Cummins in a metric equivalent to a 35x12.5 and I also have them on the Burb in a 31x10.5x15. They are made in a 33" tall and are M+S rated. Looks like they are studable too, not 100% sure though.
  9. Crispy

    SOLD 1987 k10 suburban for Parts *All Gone*

    Email sent.
  10. Crispy

    SOLD 1987 k10 suburban for Parts *All Gone*

    Well thank you! I'm gonna snap a picture of exactly that part thats missing on the truck. I will also email you a UPS label, I run a warehouse so I can at least cover the shipping. I'll PM you later today or tomorrow morning.
  11. Crispy

    SOLD 1987 k10 suburban for Parts *All Gone*

    DO you wanna try and keep the console complete and sell whole? If so I understand. If not, how much do you want for the latch?
  12. Crispy

    SOLD 1987 k10 suburban for Parts *All Gone*

    Would you be willing to sell the center console latch only? Also, if its a higher model, do you have the woodgrain inserts for the front door panels?
  13. Crispy

    Removing PS Pump Pulley

    I've used the loaner from Advance with no issue. Now I live too far from any of the auto parts chain stores so I bought a cheapy one from eBay to do the pump on my W150. I'll let you know how it goes.
  14. Crispy

    Green Gas Monkey Wrecked Truck being rebuilt.

    I think $800 for the donor truck is a good price, at least in PA. You can see through the truck tothe other side of the road for $800 up here. As for him not knowing trim levels, its a pretty easy explanation. I recently stumbled upon his channel and it seems like he does late model high end...
  15. Crispy

    Cup Holders?

    Between your legs like we all did prior to the creation of cup holders? I use the center console and my hand to support the cups every now and then to keep them from flying. edit: My Burb came with those cupholders that go in the window channel and they are OK for a smaller cup but are flimsy...
  16. Crispy

    Engine Detailing?

    Gunk engine cleaner A little scrubbing with a soft brush Rinse Repeat on caked up areas. Last engine I did it on a 185k 1.9L TDI. Looked like a low mileage engine after, I didnt spend too much time on it either. Couldve been better if I cared lol.
  17. Crispy

    Not sure if I want to do brakes on my own, what's a decent price?

    Someone with a bit more knowledge than me will have to answer that question for you. I know the 4wd required pressing in studs if you wanted to swap calipers. Not sure if the 2wd setup is just unbolt and pull off. Do some reading, ask some questions, do more reading, watch some youtube videos...
  18. Crispy

    Not sure if I want to do brakes on my own, what's a decent price?

    I'm welling to bet thats for pads only. @Iamthewalrus AC Delco Calipers will run between 35-50 per side. Bosch or Wagner pads will be 15-25 for both sides Rotors of any brand are 45-60 per side Drum brake hardware is like 5 bux for the bag and does both rear sides Brake shoes really vary in...
  19. Crispy

    Ls4

    Anything different you have to do to run the LS coolant overflow tank with the squarebody radiator? First time I've seen that. Usually see the square rad with square overflow or an LS sealed radiator with the LS overflow.
  20. Crispy

    My 1982 Buick Grand National Project basket case

    Love me some GNs. Good looking projects. Those cars are getting hard to come by and yours isnt too far gone. I second the LS swap, Its soooooo easy to piss of Buick enthusiasts lol
  21. Crispy

    Ls4

    The block is drilled for FWD trans applications so a RWD 4L60E would require an adapter. I think you can use a V6 RWD 4L60E, though. With that said you may be able to use any trans that was behind a 60 degree V6 engine (3800, 3400, etc.) The front accessory drive is completely different and I...
  22. Crispy

    Rebuild an engine in the truck

    A buddy of mine of mine changed main bearings in a P30 while in the truck once. I wouldnt wanna deal with it. My suggestion is to get some harbor freight coupons and buy the cheaper 1 ton engine hoist and the 1000 lb engine stand. I've pulled LS motors, SBCs and jsut recently an Olds 403. I've...
  23. Crispy

    What have you done to your square lately??

    Is that a vagina joke?:bleh:
  24. Crispy

    What have you done to your square lately??

    I'm back from the abyss! Since the last episode I've closed on a 53 acre farmhouse that has a garage that was converted from a barn. So I have 2 car parking up top and around back I can drive one in or have 2 with the use of dollies. Currently upstairs are the Burb and the 65 Skylark. More pics...
  25. Crispy

    exhaust

    Not a jab at all bro! Sorry if it came out that way. :cheers: If anything it was jabbing at my own exhaust which I cant stand.

Latest posts

Forum statistics

Threads
48,416
Posts
1,066,933
Members
42,801
Latest member
rafamartz
Top