xm20k's latest activity
-
xm20k replied to the thread Original color of my instrument panel?.That explains a lot my original was cracked, and you could tell it was just black plastic with silver added on around the gages etc... -
xm20k replied to the thread Can you pls identify this distributor wiring harness?.Plug the Distributor wire direct to the cap and toss all that nonsense out whatever it is it's not needed. Based on the fact you have an...
-
xm20k replied to the thread 81 C10 SWB: Tie rods and adjuster sleeves.Running the part numbers for your tie rod ends they come back as basically the same as the Moogs I run, casting marks included just...
-
-
xm20k replied to the thread Original color of my instrument panel?.Should be black plastic with a screened-on silver high light some have wood gran decals as well but those were black plastic as well...
-
-
“Wisdom comes from experience. Great Wisdom comes from really ****** experience.”
-
I need to do that... I had a rag joint disintegrate after getting off the freeway doing 100+ mph. At that speed I wouldn't be here...
-
xm20k reacted to Mr Clean's post in the thread What have you done to your square lately?? with
Like.
Tried the C3500 intermediate shaft. I used a 88-2002. Got it in a salvage yard 25 bucks. Had to do just a little grinding on the stub... -
xm20k replied to the thread Transmission swap questions.My bet will be the TH350 will be a 6-inch tail from a car and not the 9" from a truck. If it were me, I'd go 400 but I could care less...
-
xm20k replied to the thread 1977 Heavy Half fender emblem.BTW there is a gentleman on Etsy making vinyl versions in stock looking form and different color variations to better fit the color of...
-
-
Yabbut you don't get to make memories like this doing it that way:
-
xm20k replied to the thread Chuck’s engine build thread!.
-
-
xm20k replied to the thread Hydroboost front brakes locking up after heating up.This either swollen shut or the liner is damaged causing it to act like a one-way check valve.
-
xm20k reacted to Ricko1966's post in the thread Hydroboost front brakes locking up after heating up with Like.
Crack a line at the master and see if that still releases them if you have to crack the bleeder to release them you probably need new...
-
xm20k replied to the thread Transmission swap questions.Tail shaft lengths require different driveshaft lengths, crossmember may sit in different position, connectors, linkage, lots of things...
-
xm20k replied to the thread Chuck’s engine build thread!.For anyone who may not get what I mean, he explains it better than me typing it out.
