Recent content by Vetteman61

  1. V

    Steering not right after new components

    Thanks for the responses. My transmission went out since this post and also while that's going on I'm going ahead and putting the 4.10 gears in it. I'll have to get back to the steering once all of that is complete.
  2. V

    Which axles to buy?

    These are the other numbers. Appears to be a G9 6. I flipped the photo upside down to make it easier to read.
  3. V

    Which axles to buy?

    OK, thanks for the info
  4. V

    Which axles to buy?

    OK, I think I may have figured out the confusion, and it's cause is on account of I'm an idiot. This is a 6 lug, not a 5 lug. I haven't driven the truck in many years and it's in my friends shop while we get it back in shape. I had thought it was a 5 lug. I went over tonight to get some...
  5. V

    Which axles to buy?

    I'm not sure I understand. I've had this 12 bolt rear end in my K5 since 2006. I already have new ring and pinion, carrier, install kit... I have everything, except when we got inside of it, the axles need to be replaced. I just need new axles for the rear housing. When I go to look them up...
  6. V

    Which axles to buy?

    This rear end originally came out of a Chevrolet Truck, but I do not know the year. Are there any identifying markings on the housing anywhere that would let me know exactly what type of axles, or what type of truck this came out of? Anything to point me in the right direction?
  7. V

    Which axles to buy?

    I have an '87 K5 Blazer. I put a GM 12 bolt in it years ago, but I'm not sure what year the 12 bolt is (5 lug). I have a new components to install, but I also need new axles and I'm not sure which ones to order. I know it has 30 splines and one axle is 30" long No measurement on the other...
  8. V

    Steering not right after new components

    I got my alignment sheet and here are some figures for the Front Wheels: Caster: Initial - left: +7.3 right: +7.4 Final - left: +7.2 right + 7.3 Camber: Initial - left: +.8 right: +.8 Final - left: +.8 right +.7 Toe: Initial - left: 0.00 right: -.25...
  9. V

    Steering not right after new components

    1987 K5 Blazer: 3" tuff country springs front and rear, 33x12.50 tires. I recently had a lot of work done to the front end on my '87 K5 due to the sloopy steering. All new ball joints, u-joints, sway bar bushings. A new steering box from RedHeadSteering, and also replaced the steering shaft...
  10. V

    Brand Reccomendations for New Gears

    Thanks for the reply
  11. V

    Brand Reccomendations for New Gears

    1987 K5 4x4. 12 bolt 1/2 rear end, stock front. 3" lift w/33 12.50s. I'm going to be changing the gears in my K5. I'm curious about your recommendations for what brand gears. I've used Yukon in the past in an automobile and they seem to be good, but I'd like to hear from your experience...
  12. V

    What rear end is this?

    Sorry for the delay.
  13. V

    What rear end is this?

    Many years ago I replaced the rear end under my 1987 K5 with a used unit, but I'm not sure what it is or what it's from. Can anyone point me give me some insight?
  14. V

    Replacement Jeep Steering / Intermediate Shaft

    Nice. I have a '78 Caprice (LS swap) daily driver that I've had almost 25 years now and it's in desperate need of a new steering box. I may do a shaft upgrade on it as well.

Latest posts

Forum statistics

Threads
41,847
Posts
903,379
Members
33,361
Latest member
iiixtremeiii
Top