-
-
VVelder reacted to Ricko1966's post in the thread Brand and Ratio for Ring and Pinion Gears? with
Like.
Barn kitty, my shop cat -
VVelder replied to the thread Brand and Ratio for Ring and Pinion Gears?.@Craig Nedrow , and @Ricko1966 Thank you both, I figured it would be a learning curve, and it would not be the first time that I had...
-
VVelder reacted to Craig Nedrow's post in the thread Brand and Ratio for Ring and Pinion Gears? with Like.
I used Yukon in a D60, excellent. Also used other Yukon parts, very good stuff. I also use Strange engineering, top of the line. I...
-
VVelder reacted to festina_lente's post in the thread Brand and Ratio for Ring and Pinion Gears? with Like.
To a point … I have an old 7.3 Ford diesel that serves as an everything vehicle: around town, hwy, heavy towing. I swapped the 3.73 to...
-
VVelder reacted to Bextreme04's post in the thread Brand and Ratio for Ring and Pinion Gears? with Like.
You will need a press and bearing pullers unless you just swap the gears and don't rebuild the axle at the same time. Getting the...
-
VVelder reacted to Turbo4whl's post in the thread Brand and Ratio for Ring and Pinion Gears? with Like.
This is very important and it is a step many people miss. I use a different method, but usually requires another person. I use a large...
-
VVelder reacted to Ricko1966's post in the thread Brand and Ratio for Ring and Pinion Gears? with Like.
Velder,there are lots of little tricks and tips if you want to do it,we'll teach you the best we can. Another suggestion I have is pick...
-
VGear set up is most definitely an “art” of mechanical know how, skill and a little luck doesn’t hurt. I normally tell people they’ll be...
-
VVelder replied to the thread Brand and Ratio for Ring and Pinion Gears?.@Ricko1966 If I can't find a good axle, I will most certainly want you to walk me through it. I am half tempted to go that route just to...
-
VVelder replied to the thread Brand and Ratio for Ring and Pinion Gears?.@Ricko1966 thank you so much for the explanation. I will certainly look into the salvaged axle option, I am not to far from three or...
-
V^^^^ this Nothing wrong with motive or Richmond, I also like Dana/Spicer gears. Make sure to get a gear set compatible with your...
-
VVelder reacted to geardaddy's post in the thread Brand and Ratio for Ring and Pinion Gears? with Like.
motive or richmond will be fine. richmond is owned by motive anyway...
-
VVelder reacted to Ricko1966's post in the thread Brand and Ratio for Ring and Pinion Gears? with Like.
Okay your 700r4 has a 3.07 1st gear multiplied time rear gear let's say 3.42 30 3.07 x 3 42 = approx 10.25 no calculator my th350 is...
-
VVelder reacted to Bextreme04's post in the thread Brand and Ratio for Ring and Pinion Gears? with Like.
I have a 10 bolt in my 2011 Suburban and I did a gear change a few years ago because we have bigger 33" tires on it and we tow with it...
-
VVelder replied to the thread Brand and Ratio for Ring and Pinion Gears?.@Ricko1966 Sorry I did not see your last post till after I posted, Yes I did see the picture, but I can't read it. Would you mind...
-
-
Loading…
-
Loading…
