Strick's latest activity
-
Strick replied to the thread 12 bolt Rear axle ratio?.Most are 3.07 ratio. Count the ring & pinion & then divide to see your ratio...which will be 3.07. -
Strick replied to the thread Headers and exhaust for a V3500.My boy had a 91 V1500 Sub with the 350 that I did headers & true duals on. It had a 1 wire O2 sensor & I jumpered it & welded a bung on...
-
Strick replied to the thread Towing with an old truck.10K lbs & 34' long. No dually truck & no trailer with dually axles. Pulled thru 20 states & 10K miles & very thankful to have weight...
-
I think the biggest challenge with a travel trailer isn't the weight but the frontal surface area/wind resistance. Your engine and...
-
Is this considered a Square Body?
-
Strick replied to the thread Towing with an old truck.Here's my '16 2500HD Max with a 10K 34' tag-along, dismantled '32 deck & 50 pavers & whatever junk would fit in the bed. This is WITH a...
-
-
Strick replied to the thread Towing with an old truck.Weight distribution will load the suspension thru the hitch. It makes tag-along trailers a much better ride. Just do the Google machine...
-
Strick replied to the thread Towing with an old truck.Here's my...my dad's C20 Crew pulling a 28' camper in the early 80's. He didn't kill it but from memory it pulled fine. 350/SM465 &...
-
-
Strick replied to the thread Adhesive Rear Cab Molding?.I'd drill a hole and attach the clip with a screw. I've been here before & now when those brads either fall or rust out & then need...
-
Strick replied to the thread Should i or shouldnt i?!!.I hate to scrap or trash good stuff but...I can't save them all. HS
-
Strick replied to the thread Should i or shouldnt i?!!.Dad was a logger but scrapped cars on the side. There were many junks in the woods where they were cutting timber often. I remember when...
-
75-83 standard ignition ds72 or ds72t
-
Strick replied to the thread V2500 frame compatibility and advice..I'm putting my 76 High Sierra 15 back together again. I thought about using a CUCV frame that I have but after a bit of thought I...
-
Agreed, but unless the OP is making a wheeler or planning on hauling really heavy cargo loads frequently, a solid 1/2 ton frame will...
-
Strick replied to the thread V2500 frame compatibility and advice..The OP sure lost out with the fire for sure. Maybe they'll get together like you said & get one working truck out of the mess. HS
Latest posts
-
-
-
-
-
4l80e conversion in 1985 suburban. What parts do I need?- Latest: NickTransmissions