shawn57nomad's latest activity
-
shawn57nomad reacted to PrairieDrifter's post in the thread Dakota Digital RTX gauge cluster with
Like.
No problem. A couple good wire diagrams and quality wire loom and you're on track to a real nice truck. One random suggestion... -
I installed an old air products system. The parts seem ok and I don't have any issue with the quality. My gripes and overall non...
-
I rebuilt my complete OEM system except I went with a Sanden compressor. Since I basically replaced all the OEM parts, cost was about...
-
shawn57nomad replied to the thread MY6 250 6 cylinder Swap to LS Gen 3 and TKX.I'm looking for the MY6/MM7/NP833 dimensions for the 4 speed. Mainly shifter location. Is it identical to a Muncie or SM465?
-
shawn57nomad reacted to krusher74's post in the thread MY6 250 6 cylinder Swap to LS Gen 3 and TKX with Like.
The only reason i would weld in is to seal them from getting water behind and being a trap for rust, but seeing you have jusst bolted...
-
@Camar068 has it right. The only reason it's three wires is because it takes place of two sensors that were used on the older engines.
-
shawn57nomad replied to the thread A/C options - 81 C10 Non A/C cab (LS Swap in progress).Well, Old Air Products got my business today. Their responsiveness and cost hit the mark for sure. They were very helpful with...
-
shawn57nomad reacted to Kwik Wayne's post in the thread A/C options - 81 C10 Non A/C cab (LS Swap in progress) with Like.
Here's another option. I have an 81 C10 with no factory AC. Instead of ripping out the heater and replacing all that with OEM parts of...
-
shawn57nomad reacted to ali_c20's post in the thread A/C options - 81 C10 Non A/C cab (LS Swap in progress) with Like.
I installed a Vintage Air direct fit system in my wife's 69 Mustang a few years ago. Install was a breeze, all required parts were in...
-
shawn57nomad reacted to Finkaire's post in the thread A/C options - 81 C10 Non A/C cab (LS Swap in progress) with Like.
I am in agreement with CheemsK15, no sense in messing with the compressor and the mount at least. Nothing compares with OE parts!
-
shawn57nomad replied to the thread A/C options - 81 C10 Non A/C cab (LS Swap in progress).Oh man that's awesome information! I'll probably have to ask as you mentioned.
-
shawn57nomad replied to the thread A/C options - 81 C10 Non A/C cab (LS Swap in progress).It is a Heat Only cab originally. Looks like the 12 volt AC is out. I'm not sure if I can find all the components to add the factory...
-
shawn57nomad replied to the thread A/C options - 81 C10 Non A/C cab (LS Swap in progress).That's new. Please explain.
-
Need real world suggestions on the 3 companies - Vintage Air, Old Air Products, and Classic Auto Air. I am going to add A/C to our 81...
-
shawn57nomad reacted to TPISly-C10's post in the thread LS swap cost - COMPLETE a-z Drive in, drop it off & pick up tuned and perfect.? with Like.
mine cost me (include re-sale old diesel engine and trans, part ect..) $1500...done all by myself so save a lot on labor ;)
