-
-
TH350s are pretty common. Why screw around with trying to get it fixed? Just buy a rebuilt unit or a used one that needs a rebuild and... -
As previously stated, get another TH350 and go from there. Where I live there aren’t any small shops that do welding/fab for walk in...
-
With respect to the heavy duty “K” cases, I’ve never noticed much difference in case thickness or extra ribbing, etc. The only real...
-
That crack isn’t at the bell housing, it’s at the output shaft that mates to the adapter for the transfer case. Sure someone could...
-
I would drill a hole just past the end of the crack (to stop the crack from continuing), and then I would call around different welding...
-
This was a lot funnier when edelbrock's post said call welding shops and tell them you are a mechanic and have a crack in a bellhousing...
-
I'd replace the case. Just went thru this with my SIL's 86 TH400. HS
-
Hello all, Wanted to make a post - it has been a minute. After removing my TH350 for an overhaul - I noticed there is a crack in the...
-
-
-
Loading…
-
Loading…
