Ricko1966's latest activity
-
RRicko1966 reacted to legopnuematic's post in the thread BBC 396 wil not idle with any carb with
Like.
You were checking timing with the vacuum advance disconnected and plugged correct? What type of timing light? Dial back? Use a... -
RRicko1966 replied to the thread Old77’s GMT400 SWB 4x4 5-speed project/DD.I'd drill pilot holes drill a 2nd hole larger,and 3rd larger yet I'd want the holes deep and big O.D. then use a narrow punch with the...
-
RRicko1966 reacted to HotWheelsBurban's post in the thread Old77’s GMT400 SWB 4x4 5-speed project/DD with Like.
WOW....I need to do ball joints on my C3500 Crew Cab. Uppers are riveted but it REALLY needs upper control arm bushings so I'm just...
-
RRicko1966 reacted to xm20k's post in the thread Needs MORE POWER!!! (Tim Taylor Style!!!) with Like.
My 388 is built on a bare 1pc, 4 bolt, oe roller casting, it didn't have anything on the front pad and it was stock deck height
-
RBlocking some of the opening isn't an issue in this case. But, you may have had a vacuum leak due to the mismatch of mounting surfaces.
-
RThe performer manifolds are designed for use with a spread bore or a square bore carb. When using a square bore carb, there's a flat...
-
RClosed loop is when the ECM is using feedback from the O2 sensor to adjust fuel trims. Open loop is when the ECM is only using CTS, TPS...
-
RRicko1966 reacted to SquareRoot's post in the thread dose anyone have any good pictures of a 3inch body lift with Like.
No such thing. Like a dude in a skirt.
-
RRicko1966 reacted to Sad Sack's post in the thread Turn signal circuit fuse is "hot-to-touch" - excessively warm with Like.
Hope I don't.
-
RRicko1966 reacted to Snoots's post in the thread Turn signal circuit fuse is "hot-to-touch" - excessively warm with Love.
No
-
RRicko1966 replied to the thread Carburetor enclosure?.Yep that's another boost box.
-
RRicko1966 replied to the thread Turn signal circuit fuse is "hot-to-touch" - excessively warm.Yes it is feeding current somewhere it shouldn't that is why I said pull fuses 1 and components one at a time so we can determine if it...
-
RRicko1966 replied to the thread Turn signal circuit fuse is "hot-to-touch" - excessively warm.I've had to trouble shoot,many electrical draws and shorts with the procedure I listed. Fuse amperage is not a cause of your issue a...
-
RRicko1966 replied to the thread Turn signal circuit fuse is "hot-to-touch" - excessively warm.I'd temporarily remove the existing offending fuse put a DMM on the leads see how much voltage you are drawing. Now remove fuses one at...
-
RThose boxes are also what they commonly use to turbo charge carbureted cars. Two cents: I don't think you would get sufficient volume...
