Ricko1966's latest activity
-
RThere’s no reason a choppy cam’d engine wouldn’t idle around 800 or so.
-
RRicko1966 replied to the thread Update on my Ignition Module failure!.Yes
-
RRicko1966 replied to the thread Engine oil lines..Motor mounts to converter cover. Here's pics of some small block ones. May have to do mods or fab work to work on a big block.
-
-
RCould the swinging pedal shaft be worn or tight?
-
RRicko1966 reacted to 75gmck25's post in the thread No power at all, zero lights, guage lights, or anything else. Any help wld be great. with
Like.
On the OEM starter there is a large lug where the positive battery cable is connected. - On that same lug there is also a red wire (at... -
RRicko1966 reacted to gmbellew's post in the thread No power at all, zero lights, guage lights, or anything else. Any help wld be great. with Like.
I'd double check to make sure you connected the wires to the starter properly
-
RRicko1966 replied to the thread Engine oil lines..To help support the weight of having the transfer case behind the transmission.
-
RRicko1966 replied to the thread Engine oil lines..As for your flexplate cover,a 4x4 cover is cast and has bosses for braces to attach to. Your missing the braces also. At this point a...
-
RRicko1966 replied to the thread 6 port selector valve help.In line 7 you say pump,in line 12 you say pumps. Do you have two pumps or 1 pump?
-
RRicko1966 replied to the thread New to the square body scene.Mountain man carbs @Doppleganger has one he didn't use. Make sure the number matches yours
-
RSo before buying any rebuild kit or attempting to rebuild me original I have to make sure the model numbers are correct?
-
RRicko1966 replied to the thread New to the square body scene.Welcome,you really don't want a rebuilt one as a general rule. The fast food rebuilders take too many one size fits all short cuts and...
-
RPretty sharp. I would assume it has a Q-jet on it now if original. If so my suggestion would be to have it rebuilt if that is indeed...
-
RRicko1966 replied to the thread Engine oil lines..If the lines at the block are still good for a few inches,you could flare them use couplers and make new hardlines,just like making...
