RanchWelder's latest activity
-
RanchWelder replied to the thread gas gauge.AuroraGirl is so smart... LOL. -
it takes a ground. the sender needs to be grounded to the truck frame, and the wire from the sender that goes to the switch yes I would...
-
RanchWelder replied to the thread Finally found a good one!."Square Body" Box body is something else. WELCOME!
-
RanchWelder replied to the thread Wanting 4" suspension suggestions.Rifle, CO just sent me great parts! Lift it safe and call the Blazerbiker, Chris64. Offer the 2" lift parts to a SQBDforum member who...
-
RanchWelder reacted to Blazerbiker's post in the thread Wanting 4" suspension suggestions with
Like.
I am, and be careful with that title! -
Are you Sir Watson? Yes, I called you "Sir" lol.
-
RanchWelder reacted to Blazerbiker's post in the thread Wanting 4" suspension suggestions with Like.
You live in a place that's different from what a lot of guys have for offroad use, you might want to consider stepping up the suspension...
-
RanchWelder reacted to Frankenchevy's post in the thread Wanting 4" suspension suggestions with Like.
I have the same truck. If that front tire travels as far as a soft long travel leaf will let it, you will get into sheet metal. I have...
-
RanchWelder reacted to RattleSnack's post in the thread Wanting 4" suspension suggestions with Like.
Agreed. If you're planning on street-driving with some light off-roading, a 4" lift with 35's should be fine...as long as you don't go...
-
How much are you planning on twisting up the truck off road? The more articulation you have the more room in the wheel wells you need...
-
RanchWelder reacted to RattleSnack's post in the thread Wanting 4" suspension suggestions with Like.
Yeah....that picture from Amazon is way wrong. Here is an actual picture of the C140S front springs: The springs come without...
-
RanchWelder reacted to RattleSnack's post in the thread Wanting 4" suspension suggestions with Like.
Mine has 4" Skyjacker C140S softride front springs, ORD HD front greasable shackles, 4" lift blocks in the rear with factory springs...
-
RanchWelder reacted to legopnuematic's post in the thread Wanting 4" suspension suggestions with Like.
Potential fitment issues with the 35s depend a lot on wheel choice (width and offset/backspacing) and tire choice, if it is a true 35”...
-
RanchWelder reacted to Frankenchevy's post in the thread Wanting 4" suspension suggestions with Like.
For leaf springs you could get ORD Custom, which are produced by Alcan. Double check all the measurements from main eye to centering...
-
I think I have a theory... check valve seemed fine, booster seemed ok too from some simple testing. I think the brake light switch...
