RaisedK5's latest activity
-
RRaisedK5 replied to the thread Rag joint question (see picture).Yes. The missing splines go where the flat spot is. The pinchbolt passes at the groove that is around the input shaft. Remove pinch bolt...
-
RRaisedK5 replied to the thread Rag joint question (see picture).There should be a flat spot on the input shaft of the steering box. That's where flat spot goes.
-
RRaisedK5 replied to the thread Fusible link?.Chances are there was a pinched wire in or around the column and was shorting to ground thru the rag joint/steering box while the top of...
-
RRaisedK5 replied to the thread Brake Master Cylinder, what adapters do I need to make this work? Pic's inside..Fyi guys. 1/2 ton masters have front res to front brakes and rear res to rear brakes. 3/4 and one ton is opposite. Front res is...
-
RRaisedK5 replied to the thread Rear end gear ratio change or transmission change ?.Fyi. Sounds like either it's not shifting or it's not really spinning 5000. Unless you have serious low rear gears.
-
-
RRaisedK5 replied to the thread Where's everyone mounting their CB's.I used to have mine down under the dash and at one time on the front of the center console. Made it pretty easy to reach BUT If I was on...
