-
-
Overthedge21 replied to the thread 78 K30 4BD2T Frame Off Build.Back at long last with an update, progress has been at a standstill the last couple weeks since my welder has been living at work for a... -
-
Overthedge21 replied to the thread 78 K30 4BD2T Frame Off Build.Currently deciding between which way to do it now. I can either toss the plates I have and make new ones out of angle iron to allow me...
-
-
Overthedge21 replied to the thread 78 K30 4BD2T Frame Off Build.Decided I didn't like the mounts I was building, was gonna hang everything too low and was way overcomplicated Cut the nut sections off...
-
-
Overthedge21 replied to the thread 78 K30 4BD2T Frame Off Build.Not a ton, they only make around 240 lbft stock, although I'll probably end up turning the fuel up and maybe upgrading the turbo down...
-
Overthedge21 replied to the thread 78 K30 4BD2T Frame Off Build.No sir different engine, the 4bd is basically just an Isuzu 4bt Cummins. It's a 3.9 with almost the same dimensions and 135 gross rated...
-
Overthedge21 replied to the thread 78 K30 4BD2T Frame Off Build.Pattern ended up being right on, they line up and bolt to the block like factory. Puts the mounts a touch lower than I'd like but not...
-
-
Overthedge21 replied to the thread 78 K30 4BD2T Frame Off Build.Now that brings us to today, where I finally got going on building engine mounts. I decided to use the through bolted rubber isolators...
-
-
Overthedge21 replied to the thread 78 K30 4BD2T Frame Off Build.Can't find the pictures of me setting the cab so we're just gonna jump-cut to the relative present, the only part that really matters...
-
-
Overthedge21 replied to the thread 78 K30 4BD2T Frame Off Build.Cleaned up and painted the new frame after removing all the old junk I wouldn't need off it Set the new suspension under it, new fuel...
-
-
Overthedge21 replied to the thread 78 K30 4BD2T Frame Off Build.So this was the truck when I got it. Run of the mill best down wrecker. Drove a couple hours one way under the promise that it was...
-
-
Overthedge21 posted the thread 78 K30 4BD2T Frame Off Build in Diesel 6.2, Conversions Cummins, etc..Been a long time since I've been on here, and I've built several trucks but never bothered to post any of them. This one though I figure...
-
-
Loading…
-
Loading…
