Old Guy Bill's latest activity
-
Old Guy Bill reacted to Bextreme04's post in the thread Modified engine crewcab gas mileage? with
Like.
4l80 will just bolt up to the T-case if the T-case is already behind an '85-later TH400. They use the same round bolt pattern after 85... -
I figured it was bolt stretch, or maybe there was a transmission/transfer case option the WOULD have needed the spacers for acceptable...
-
This is correct. And retain the clamping force for a longer period of time. K
-
One situation I have seen where hardware / bolts don't make sense has to do with car model versions. Same for the wiring harnesses. Let...
-
Short bolts don't stretch the same as long bolts do, so long bolts+ spacers allows proper clamping load I see prairie drifter beat me...
-
Old Guy Bill reacted to PrairieDrifter's post in the thread Auto wiper lifters to save edge with Like.
Upgrade to the 86 wiper arms. They are a post style and work well. The old "pin style" are terrible. Not to be an ass but I would never...
-
Just an example of a happy $4k Oregon truck to raise the spirits. I mean, it’s at a used car dealer so….gotta be a bit more than a “good...
-
There shouldn't be shims there, but it's a quick way of adjusting the door with the fender still mounted. As for causing stress cracks...
-
Old Guy Bill replied to the thread Who sells the best replacement gas tank.I put Dorman tanks in mine.. they fit.
-
No sir, there's plenty of cut-them-up folks here too! Drive them and use them like trucks, I always say.
-
Sounds like the wheels locate on the lug shank,the washers are there for clamping pressure,not location. Make sure the depth the lugs...
-
Old Guy Bill reacted to ali_c20's post in the thread Differential swap / bought it, work and install now with Like.
I use furniture dollies for moving axles around in my garage. I put my "shelved" transmission, engines, transfer cases and other heavy...
-
Old Guy Bill reacted to Ricko1966's post in the thread Differential swap / bought it, work and install now with Like.
Tree limb and a couple of pulleys?
-
I get that square dually beds are getting harder to find but trust me, neither bed is going to look decent on there. Nothing lines up...
-
The ones I remember had what was basically a hose clamp holding the magnet to the drive shaft.
