Recent content by metal tech

  1. M

    New from Oklahoma

    Welcome from Choctaw. Looks like a good truck to start with.
  2. M

    Adding second fuel tank and efi fuel pumps

    I'm doing an EFI compatible rebuild on my 84 K-10 and maybe some of what I'm doing may provide some help. I'm using 20 gal tanks, factory EFI sending units with in tank pumps compatible with E-85. I'm wiring each pump and sending unit separately to a DPDT Carling Rotary switch thru a relay. For...
  3. M

    Best Gasket Sealer

    I read recently about an idea of helping an RTV sealed area not leak. Don't fully torque the bolts, but allow the RTV to "firm up" then torque to spec. I do have to second the Lube Locker gaskets, I have not had one leak yet, and they are reuseable if taken apart carefully.
  4. M

    Can you run Schaeffer 50W oil in a SM465?

    When I was stationed in Idaho, I had a 76 GMC and used the Amsoil in the trans. With regular gear oil it was really hard to shift in the winter. I swapped to the Amsoil and it was so much smoother in the cold, summer time it was even lighter shifting, but it did make a little more noise. I put...
  5. M

    NVU gauges

    I looked at these before I got the Speed Hut gauges. I certainly think they are a nice upgrade from stock guages. The Speed Hut has the blinker & High beam indicator on the speedo also. I only went with the Speed Hut as they had more options for range on speedo & tach and color combinations.
  6. M

    Homemade car trailers

    this is late for this discussion, but, if you want to build a trailer of your own. Check out some of the trailer MFG web sites for info. Many list the material used and you can judge your load requirements to match. I built a 20ft dovetail trailer back in 2000. I used channel for everything...
  7. M

    TrueTrac for rear axle...likes/dislikes?

    I installed Truetrac's in the front & read diffs on my 01 Ram 3500. I do have to add 6-800 lbs between the wheel wells to give the rear tires some weight on them. We don't get much snow in OK, but I do not fear having to drive in it any more. The cummins give the front tires enough weight so...
  8. M

    Rear Shackle Replacements

    ORD has some very good parts but there other options. I bought these. https://diy4x.com/product.php?productid=17708&cat=250&page=4
  9. M

    What tdc tool do y'all recommend?

    https://www.summitracing.com/parts/sng-33650 Mr Gasket or Moroso also make a whistle style. I tried to use the rod version shown in first post, no luck as the dome/valve reliefs on the piston bound up the rod. There is info that recommends the rod style for engines that have the spark plug in a...
  10. M

    Latest thinking on replacement gauges

    These may not be for everyone as the style is not a factory look. This is what I ordered from Speed Hut.
  11. M

    I want a rear sliding window!

    I got a slider from a auto glass shop and it was the single pane slider. I made arrangements to have them do the install after I got it tinted. These days you need the added tint for the sun and those driving behind you with the high beams on
  12. M

    Adding convertor (s). Yes, I said adding.

    YES, long tube headers are going to need either ceramic coating or wrapped to keep heat in to light cat. This is also why most have to use a heated O2 sensor with headers, lack of heat. If you have the space put the cats right after the collector adapter. Trying to be green isn't easy on old stuff.
  13. M

    bearings instead of bushings front control arms

    contact Global West, they make numerous Delrin bushing sets for GM and Ford. You may need measure your control arms so they can possibly match on the shelf parts. I installed a set on my 94 Vette up front. No increase in ride harshness as I didn't change either the shocks or spring rate. The...
  14. M

    I'm taking the plunge....2005 seats in a 76

    I just got a set of 2008 Chevy seats & center seat/console for my 85. My console has the cup holders on the upper lid portion.
  15. M

    Latest thinking on replacement gauges

    I ordered a set of Speed Hut gauges. You can pick from numerous face, lighting, ranges and other options. I've got another 3 weeks or so till they arrive.
See more

Latest posts

Forum statistics

Threads
48,413
Posts
1,066,764
Members
42,792
Latest member
WyldTinker
Top