-
-
LateOnTheBrakes replied to the thread 80's Wiper technology sux. -
-
-
LateOnTheBrakes replied to the thread 80's Wiper technology sux.To follow up I swapped the motor, ran a tap through the threads to clean them up, and ran a dedicated ground to the firewall. I still...
-
LateOnTheBrakes replied to the thread Emergency brake.Got the crossmember raised up. It was a pain but looks much better.
-
-
LateOnTheBrakes replied to the thread Inadequate Heat.I actually set the first fan to not kick on until 220*F. But I am thinking two 1300 CFM fans are overkill. One fan drops the temp by...
-
LateOnTheBrakes replied to the thread Inadequate Heat.As I mentioned and shared videos the blend doors work fine and are cable actuated.
-
-
LateOnTheBrakes replied to the thread Inadequate Heat.The Holley EFI triggers were set that low to start with. But it's been set at 215 for the last month when I noticed I was having to wear...
-
LateOnTheBrakes replied to the thread Inadequate Heat.Normally I have the triggers set on at 195, off at 180. I have them set to 210 and 215 right now trying to see if it's warmer. It's...
-
LateOnTheBrakes replied to the thread Inadequate Heat.
-
LateOnTheBrakes replied to the thread Inadequate Heat.The water circulates with the thermostat closed or open. I know it's getting up to temp.
-
-
-
LateOnTheBrakes replied to the thread Inadequate Heat.Bought the truck without an engine.
-
LateOnTheBrakes replied to the thread Inadequate Heat.It's not brass. It's aluminum and looks really good. Thermostat is less than a year old and I know it's opening, but the heater core...
-
LateOnTheBrakes replied to the thread Inadequate Heat.Yeah. 195*F thermostat. I ever set the electric fans to not come on until 210*F to see if that helped. Not much.
-
LateOnTheBrakes replied to the thread Inadequate Heat.The LS has dedicated outputs for heater core.
-
-
-
Loading…
-
Loading…
