Kowboy
Latest activity Postings About
-
-
Kowboy replied to the thread Got me puzzled to say the least.All I did was check base timing and it was at 10 degree -
Kowboy replied to the thread Got me puzzled to say the least.Only thing I would’ve done prior is new plugs and wires
-
Kowboy replied to the thread Got me puzzled to say the least.I don’t know a whole lot about the engine other than it being a GM GoodWrench crate engine with 40,000 miles on it roughly
-
Ignition timing, timing advance curve, fuel octane, and compression ratio all go hand-in-hand.. 89 octane will work with compression...
-
Kowboy replied to the thread Got me puzzled to say the least.It’s got 2 brand new Flowmaster FlowFX mufflers on it, the alt and ps belt were done recently, there’s no heat shields on the truck
-
Kowboy replied to the thread Got me puzzled to say the least.I know when it comes to something like this it has to be heard in person and felt, I started out running 87 octane when I first got it...
-
So I have a problem and I don’t have any idea what it is. Running down the road in gear at any RPM above 1700 I have a rattle, it kinda...
-
Kowboy replied to the thread Dash lights not working.AutoZone didn’t know what I was talking about, Advance had an idea but didn’t have one, don’t have an OReillys in the area, and Napa is...
-
Kowboy replied to the thread Dash lights not working.Well the parts stores in my area didn’t have any idea what I was talking about and the one didn’t have one nor knew when they could get one
-
Kowboy replied to the thread Dash lights not working.I traced everything, what I ended up doing is jumping power off the tail light wire on the switch, what had happened apparently the...
-
Kowboy replied to the thread Dash lights not working.Well boys, I completely redid the radio wiring and still no dash lights, started checking for power on the wire for the dash lights and...
-
Kowboy replied to the thread Dash lights not working.I have tail lights
-
Kowboy replied to the thread Dash lights not working.Yes factory harness the RetroSound doesn’t have a plug so I had to cut the factory plug off and use a junction block to wire it up
-
Kowboy replied to the thread Dash lights not working.I have 2 gray wires coming from the truck harness and one black I didn’t use, I used the cigarette lighter power for my CB power wire I...
-
Kowboy replied to the thread Dash lights not working.There was no information in the instructions I was disappointed in the quality of that, I have my CB using the cigarette lighter wire...
-
-
Loading…
-
Loading…
