Recent content by kenn

  1. kenn

    Replacement panels quality

    plus 1 on fixmyrust, heard they are better than most. I got mine from LMC and they sucked thin steel, fit was crap and to beat it all not cheap in price at all
  2. kenn

    Stepside fender braces

    Yes thank you :)
  3. kenn

    Stepside fender braces

    Anyone have a photo (or willing to take a photo) of the front upper and lower braces on your step side . I don't remember how my came off I have the brace labeled, I must have replaced the metal where the hole was low part of brace is in hole in lower Fender before wheel opening...
  4. kenn

    Stepside metal repair and paint

    78 k10 all rotted wood removed , all rust cut out, patch panels welded in , floor supports welded in, Painting single stage from summit, started under bed sides while upside down
  5. kenn

    Stripping Paint

    If you have big elbows it will go pretty fast LOL That's going to be a ton of work
  6. kenn

    Decent Paint That Won't Break the Bank

    Michigan here as well, have summit check for a low voc replacement Went thru same thing with them a month ago. I was able to replace the items they couldn't ship with either a low voc, or a different brand. Was able to order entire paint supplies from summit.
  7. kenn

    DIY paint??

    Doing the same here, and I decided to do it my self Figure it would be a good project, and I'm willing to live with my results Lots of youtube vids on this stuff I have spent 2000 so far on tools and supplies, so either way this is not a cheap project, but was quoted 8000 for a basic...
  8. kenn

    2in or 4in?

    I would second the tuff country springs over rough country (softer ride) I would have a few hundred bucks put up for replacements parts along the way I did 4 inch lift had to replace dry rot front brake lines 80$ had to replace drivers front hard line (flare nut rusted to flex line and...
  9. kenn

    stepside fuel filler hose and vent

    LMC repops have the higher hole location for filler will have to try and find a longer replacement hose
  10. kenn

    raptor liner

    anyone have raptor bedliner applied? I was thinking of spraying in bed, and rear fender wells with this on my step side. does it collet dirt? clean up well? is it tough? Thanks for any advise
  11. kenn

    Is there a lift on this ?

    Front axle tube to bump stop bracket measures 12 3/4 inches
  12. kenn

    Is there a lift on this ?

    Alcans look sweet, just wasn't in my budget this year. Maybe I will get them if I ever go to a 6 inch lift
  13. kenn

    Is there a lift on this ?

    Maybe someone removed leafs for a softer ride
  14. kenn

    Is there a lift on this ?

    4 inch tuff country springs looks like same arch
  15. kenn

    Is there a lift on this ?

    I would check anything rubber, my 78 was pretty crispy ended up changing ball joints , and steering drag link while doing the lift
See more

Latest posts

Forum statistics

Threads
42,030
Posts
907,758
Members
33,524
Latest member
DENREXX169
Top