It appears to bind up at the carrier end. So, I removed the spider gears to make sure nothing is in the way. While the axle is out I confirmed that the splined gears fit the axle. I will try again today
It appears to bind up at the carrier end. So, I removed the spider gears to make sure nothing is in the way. While the axle is out I confirmed that the splined gears fit the axle. I will try again today :)
An axle seal failed so I'm replacing all seals, bearings and ruined brake shoes.
I removed the bolt and pulled out the steel rod to remove the C-clip. Then removed the C-clip from the diff to pull the axle shaft and begin bearing and seal replacement. After after replacing bearings and seals I...