Recent content by Handy Andy
-
H
pcv port and breather port have vacuum on them
Wow, so I finally got around to working on the red rocket the last couple days. Pulled the intake off and low and behold I saw a sight just like the picture squareroot posted.... ****** Edelbrock Gaskets delaminated and went to ****.... cleaned everything up, reassembled with fel-pro gaskets...- Handy Andy
- Post #8
- Forum: Engine & Performance
-
H
pcv port and breather port have vacuum on them
I haven't hooked up a vacuum gauge yet. Even with the pcv valve unhooked from the carb, there is still a great deal of vacuum at the breather port on the passengers side valve cover. I didn't get a chance to check the torque on the intake bolts to see if any were loose. I did however grab a...- Handy Andy
- Post #6
- Forum: Engine & Performance
-
H
pcv port and breather port have vacuum on them
Yup aluminum heads. The front 2 cylinders on each side seem to foul up the fastest, but today I changed all the plugs and they were all very bad. I'd say the front 4 foul 2x as fast as the back 4. I've unhooked the pcv hose from the carb and blocked the vac port on the carb. Gonna drive it...- Handy Andy
- Post #3
- Forum: Engine & Performance
-
H
pcv port and breather port have vacuum on them
Ok guys, this one has me looking for some answers and ideas. To start off, I'll just say the motor is a carbed 350, dart heads, edelbrock intake manifold and new edelbrock 1906 carb. Nothing real crazy, just something thats fun to drive and it gets used for work around the property as well...- Handy Andy
- Thread
- Replies: 7
- Forum: Engine & Performance
-
H
GPS Speedometer
I know this post is old, but I have the intellitronix GPS signal generator for my intellitronix speedo. It works fine, but it lags. This isn't a big deal for now, but I'm hoping to install a rostra cruise control kit when I have time and I just wonder how well it will work with a speedo signal...- Handy Andy
- Post #3
- Forum: Gauge, Speedo & Instrumentation
-
H
custom cluster bezel kits for edge gauges.
yea I was just kinda hoping to avoid the $12-1300 price tag that comes along with those lol. My truck isn't a show truck, so I don't nee gauges that look real pretty. I purchased a set of intellitronix gauges about 18 months ago and installed them... since, I have had to replace the included...- Handy Andy
- Post #5
- Forum: Interior
-
H
custom cluster bezel kits for edge gauges.
I know this is an old post and my question is a bit off topic, but are you using this with an old school gm motor? or are you LS Swapped? I've been looking for something like this that I could use with my old carb'd 350 just to replace all the ****** intellitronix gauges that are in my dash...- Handy Andy
- Post #2
- Forum: Interior
-
H
Wiper Issue
Yep it does have intermittent wipers. I replaced the "stalk" before I ever did any kind of looking into the issue. I have to drive them down to the spot I want them in and then let off and they will stop wherever I let off the mist function. I was able to find a youtube video where a guy...- Handy Andy
- Post #3
- Forum: Exterior
-
H
Wiper Issue
Ok, I've been reading through old threads for the last hour and found one mention from a guy who was having the same problem as I am having, but there was no fix for it. truck is an 86 gmc k1500 and when I turn the stick to kick on the wipers they work fine. When I return the knob to the off...- Handy Andy
- Thread
- Replies: 3
- Forum: Exterior
-
H
400 SBC vs 454 BBC
how bout a 377 stroker? 400 block with a 350 crank... if your gonna be doing lots of mudding, and with the gears you plan on running, a 377 stroker built to handle high rpms sounds like a decent option. The biggest deterrent for a 377 stroker is that in order for it to be really worth it you...- Handy Andy
- Post #10
- Forum: Engine & Performance
-
H
Strong gas odor
no fuel on the ground? I've actually had both of my tanks fail in the last year.... replaced the drivers side when it started pouring gas on the ground, and now 10 months later the passenger side is dumping fuel out. gotta find time to get it swapped out now.- Handy Andy
- Post #5
- Forum: Carb Fuel Systems
-
H
Backfire through carburetor
One other thing to check that I haven't seen mentioned yet is make sure your 5 and 7 cylinder plug wires are spaced out properly. If I remember correctly, because the location in the firing order is so close on these two cylinders, an induced spark from the 5 wire to the 7 wire could possibly...- Handy Andy
- Post #18
- Forum: Carb Fuel Systems
-
H
Brand new quadrajet untunable!
While a q-jet does like a lower fuel pressure, if that was what was causing your problems I don't think you would have to turn out your mix screws 8 turns. I think you would actually have to turn the screws in to limit the fuel being pulled into the motor via the idle circuits because the high...- Handy Andy
- Post #5
- Forum: Carb Fuel Systems
-
H
Cam decision
what cam is in it? If you want great low and mid torque then I would recommend a comp cams 12-235-2. I had one of these in my 400 before I blew it up and it was great for low end torque. You won't get any of that lopey sound with it, but it is a great cam and with my dart SHP heads, flowtech...- Handy Andy
- Post #3
- Forum: Engine & Performance
-
H
Truck runs rough, help!
so when it is sitting there just turning over and not starting, does it do anything at all besides just crank over?? like any popping spitting sputtering etc? Also, when was the last time you changed the oil? any kind of metal shavings in it? Also, do you have decent fuel pressure? Not sure...- Handy Andy
- Post #46
- Forum: Engine & Performance
