gmbellew's latest activity
-
Ggmbellew replied to the thread 700R4 Gear “Hunting”.Are you sure it is the 3/4 shift bouncing or is it the TCC hunting? Could be an issue with the TCC lockup solenoid? Does the issue go...
-
Ggmbellew replied to the thread 1991 suburban sunvisors in 1987 pickup? Will they fit?.My 1990 burb has the inboard clips
-
GBeen driving the truck for a few months since my last post and wanted to update with a fix now that I haven't had the issue for a while...
-
Ggmbellew replied to the thread Power window problem (yes I searched).pretty sure the whole system grounds back through the driverside switch and to the busbar above the ebrake. not sure if the switch has...
-
Ggmbellew replied to the thread Latest thinking on replacement gauges.No doubt the DD gauges are awesome. If I were to make the leap, I’d go all the way to their top of the line. But I still keep rocking...
-
Ggmbellew replied to the thread Oil pressure sensor?.my 1990 burb has a combo oil pressure sensor and and fuel pump bypass all in one behind the distributor. I'd guess your 89 is the same...
-
Ggmbellew replied to the thread Bus Bar Ground.windows are on a separate circuit breaker. if both switches are out and you have power, id suspect the ground or maybe the driverside...
-
Ggmbellew replied to the thread Bus Bar Ground.should be under the dash above the kick panel above the e brake. you will have to get upside down to look up under there with a light...
-
Ggmbellew replied to the thread What have you done to your square lately??.yeah, code 13 is prob a bad O2 or maybe a wiring issue....it is an open signal i think. code 44 is lean, prob bc of the bad O2 sensor...
-
Ggmbellew replied to the thread Power door locks.That’s the place! You should be able to see it if you look up under the dash. But I’d run through the diagnostics in the wiring manual...
-
Ggmbellew replied to the thread Power door locks.A DVM is not a jumper wire. You need a jumper wire to jump the switch. Also check the ground side of the circuit, especially if both...
-
Ggmbellew replied to the thread Driving lamps/Fog lights? Anyone running them on their c10?.I have some 6in diode dynamics LED in a flood pattern mounted to the underneath side of my rear bumper. They put plenty of light out for...
-
Gjust did the esc module, and drove it about 100 miles round trip today, it seems to have fixed my problem, thank you for the help
-
Ggmbellew replied to the thread Failed smog on 1988 with 350 TBI.Remember that MAP reports out absolute pressure, not gauge pressure. So subtract the MAP reading from atmospheric and that is gauge...
-
Ggmbellew replied to the thread Failed smog on 1988 with 350 TBI.thats the stock plug, and what I run
