Recent content by desertdog1

  1. D

    Replacing stock clock with small tachometer in 83 C20

    I was wondering if I could somehow pry off the mounting plate for the clock and attach it to a small aftermarket tach?
  2. D

    Replacing stock clock with small tachometer in 83 C20

    So, a close "force fit" to hold it against the black bezel cover? I can see how that would work but I think the aftermarket tach is somewhat heavy, so maybe the black bezel cover plate might bend too much?
  3. D

    Replacing stock clock with small tachometer in 83 C20

    I see that some have replaced the clock in their square bodies with a small aftermarket tachometer. I would like to do this in my 83 but don't know how the aftermarket tachometers would attach to the instrument backing plate. Does anyone know how this would be done? The clock is attached to a...
  4. D

    14 bolt rear hub seal advice

    I have a 83 C20 14 volt 410 real axle. I had the rear axle seals (aka wheel seals) replaced at a differential shop and they used the one piece style. The seals leaked and ruined my rear brake shoes. I had them install the newer style two piece seals and have had no leaks since then (about 20...
  5. D

    Best 454 all around build

    I have a 83 C20 454 with SM 465 granny 4 speed and 4:10 rear axle. I also looked into replacing the granny with a NV4500, but I don't drive the truck very often so the large $$$ investment was not worth the hassle. It is not easy to find a used NV4500 where I live and you will need a lot of...
  6. D

    C20 Camper Special 454 Engine Starter Wiring

    Off topic, but if you have trouble with your 454 not starting because of starter heat soak, I recommend a Powermaster Ultra Torque mini starter. I bought a model 9612 168 tooth starter from them - not cheap but works well. I had a pro auto electric shop install it because I was concerned about...
  7. D

    C20 - Trailering vs. Camper Special

    HI Keith. Do you know where I could get the CGWR for my 83 C20? I do not have a SPID label. It is a long bed regular cab 2WD 4:10 rear axle with SM465 manual 4 Speed with 454 engine. It is a camper special but does not have any of the extra brackets described above. The previous owner used...
  8. D

    It may not be your windshield antenna.

    Speaking of antennas, I have an 83 C20 and the button that attaches to the bottom of the windshield (which then attaches to the mating snap on the antenna cable end) has separated from the windshield. Does anyone know how to reattach the button to the windshield? I would assume some kind of...
  9. D

    Heat Riser Help to Pass CA Smog

    I know this is an old thread, but I have an 83 C20 and have a similar issue with my 454 EFE "heat riser" valve. I am in Arizona and must pass emissions every year. The connection between the EFE valve and the metal tube going up to the TVS on the intake manifold is broken. If if use the...
See more

Latest posts

Forum statistics

Threads
45,570
Posts
986,595
Members
38,662
Latest member
imyourhuckberry
Top