Craig Nedrow's latest activity
-
The 10si/12si need sense,. it goes to the junction block on the firewall iirc The excite goes to the resistor (or bulb) to excite On... -
That one in your link doesn't use a sense wire? I thought the two that HAD to be used were sense and excite? You may have to explain...
-
Also, if @Frankenchevy got a gas burb, and if You would like the newer FFM fuel filter system let Me know. I have a good spare unit...
-
And also. I dont remember the diameter of the pulley for the alternator that drives the tach signal so be sure that if You have the...
-
that there is a 105 amp CS130D If you wanted a larger output youd need to either use a AD244 or a CS144 which only the AD244 has the...
-
I am not currently, but I might someday in the future That's the one. I apologize. I didn't realize there were so many types of...
-
be really helpful if you showed us. Based on what i found qiuckly, the 2000 detroit had 3 alternator family options are you using the...
-
Craig Nedrow replied to the thread Hello, my name is Derek, and I have Just joined this page, trying to find some good information on working on my new 1978 k30.That was like "cool man," back in the day. I had one in the 67 Charger, yeah it sounded cool.
-
Craig Nedrow reacted to Turbo4whl's post in the thread Hello, my name is Derek, and I have Just joined this page, trying to find some good information on working on my new 1978 k30 with
Like.
Dead radios, I got a picture. And a bonus, trunk mounted factory Motorola reverb unit! -
See attached chart.
-
Craig Nedrow replied to the thread High oil pressure after replacing pump.In theory, (I love to live there,) you need 10 lbs pressure for each 1000 rpm. My Moroso pump comes with three springs, I have the 70...
-
Craig Nedrow reacted to Redmanreaction's post in the thread High oil pressure after replacing pump with Like.
I completed the same pan work as you. My new non-high pressure pump runs at those same levels and only in high temps at idle show a...
-
Craig Nedrow reacted to Matt69olds's post in the thread High oil pressure after replacing pump with Like.
There’s nothing to worry about with your oil pressure. If it will ease your mind, next time you change the oil, cut open the oil...
-
Craig Nedrow reacted to Goldie Driver's post in the thread High oil pressure after replacing pump with Like.
That's about what Goldie runs with the high volume oil pump and 5W30 Valvoline Restore and Protect oil. After good and warmed up coming...
-
Craig Nedrow reacted to fast 99's post in the thread High oil pressure after replacing pump with Like.
That's a slight bit higher than most SB I have seen but not high enough to worry about. After all, it's not a Chrysler that blows oil...
