Craig Nedrow's latest activity
-
Craig Nedrow reacted to 13matsc's post in the thread High oil pressure after replacing pump with
Like.
Thanks. Heres a picture of a cold start today on high idle. Medium idle drops it to just over the 60 psi mark. About 10 degrees celcius... -
Craig Nedrow reacted to Fastduramax's post in the thread High oil pressure after replacing pump with Like.
Perfect, higher=better every time, 3 pumps, stock, high pressure stock volume, and high volume which naturally creates higher...
-
Craig Nedrow reacted to DoubleDingo's post in the thread High oil pressure after replacing pump with Like.
Sounds like normal oil pressure to me. If you had worn main and rod bearings it may be lower, but I wouldn't sweat the numbers you're...
-
Craig Nedrow reacted to legopnuematic's post in the thread High oil pressure after replacing pump with Like.
I wouldn’t be worried about that at all.
-
Craig Nedrow reacted to Grit dog's post in the thread High oil pressure after replacing pump with Like.
Sounds just right. Although previous pump was also fine at those pressures.
-
Craig Nedrow reacted to 13matsc's post in the thread High oil pressure after replacing pump with Like.
Hi guys, My truck has had a leak from the oil pan gasket for some years now. Finally dropped the pan and installed a new fel-pro...
-
Craig Nedrow replied to the thread Eaton MLocker.I have a yukon lunchbox locker in the 14ff, and a Spicer lunchbox locker in the D44 front, like em.
-
I suppose any remote amount of maintenance of the rear end fluid is going to lengthen the life span of the Mlocker. HOw do you like a...
-
My buddy had a picture, can barely see it, but there's a couple teeth missing there, there was other spots that were missing 5 or 10 teeth.
-
mine works pretty good in my 2005 .. but i also just had a very bad stuck situation with my truck and the attempts at getting out...
-
Don’t think I have any pictures but the two 9.5s I had taken apart it G80 Gov Bombs, both of them had chipped or missing teeth in the...
-
The trutrac is a Tosen style traction device. Would be my choice if a selectable locker is not in play.
-
im more convinced its because of the fact they have an exlusive contract with GM, meaning that GM is probably the only seller of the...
-
Considering how many G80s I've seen explode themselves, even on easy driven trucks, no way I'd consider that. I'm with Spencer, I...
-
Personally I’d go with a clutch type limited slip, Yukon dura grip or similar, or the Eaton “posi” (same thing). They can be...
