Craig Nedrow's latest activity
-
Now that brings us to today, where I finally got going on building engine mounts. I decided to use the through bolted rubber isolators... -
Can't find the pictures of me setting the cab so we're just gonna jump-cut to the relative present, the only part that really matters...
-
Cleaned up and painted the new frame after removing all the old junk I wouldn't need off it Set the new suspension under it, new fuel...
-
So this was the truck when I got it. Run of the mill best down wrecker. Drove a couple hours one way under the promise that it was...
-
Been a long time since I've been on here, and I've built several trucks but never bothered to post any of them. This one though I figure...
-
Craig Nedrow reacted to 77Dmax's post in the thread 1990 Suburban 350 TBI camshaft question with
Like.
Cars got roller cams in 87. All blocks were cast for the roller provisions at that point, but were only drilled for the spider if... -
Craig Nedrow reacted to geolee's post in the thread 1990 Suburban 350 TBI camshaft question with Like.
Flat tappet
-
Craig Nedrow reacted to geolee's post in the thread 1990 Suburban 350 TBI camshaft question with Like.
I think 98 but not positive
-
There's a young girl who rebuilds carburetors. Supposedly good work. rileysrebuilds.com
-
National Carburetor out of Florida rebuilds and sells newly rebuilt ones. I had one on my truck for a while (a buddy bought it from them...
-
@Doppleganger has a good carb for you,compare carb numbers,work out a price. I've bought parts from mountain man,but do my own...
-
John Herald Jr Ray Kleem there are several others on the Q-Jet Facebook page. I know Ray and Cliff worked together, I think Ray took...
-
Craig Nedrow reacted to Matt69olds's post in the thread Truck cranks and starts and dies immediately with Like.
Since you have HEI, the BEST way to wire it is to find the original resistance wire and remove it. Then you can install a regular wire...
-
Craig Nedrow reacted to 75gmck25's post in the thread Truck cranks and starts and dies immediately with Like.
The wiring colors at your starter are not original. - red wires appear correct, but there should be a fusible link in the small red...
-
https://www.repairconnector.com/ one of the other members shared this a while back!
