Recent content by Copakekid

  1. C

    What Engine Do I Have

    Thank you, I called the parts store earlier and found one.
  2. C

    What Engine Do I Have

    It runs pretty good as is, and isn't going to get modified. I bought it to be just a driver and for the Power Tour. My wanting big horsepower days are gone, I have seen what it has done to vehicles and my wallet. Ricko, I'm probably over packing, but I want to take an extra fuel pump as that...
  3. C

    What Engine Do I Have

    I didn't look, but I'm assuming they are the stock heads. I'm trying to figure out what fuel pump to buy for it as a spare for Power Tour. I'm assuming that in 94 it came with an electric pump. It has a manual on it now. I have been out of the Square body game for a long time.
  4. C

    What Engine Do I Have

    I just changed my search wording on the internet, and found a list from LMC Trucks. They list "FSC" as a 1994 350(5.7L) so I guess I'm all set.
  5. C

    What Engine Do I Have

    I have a 1984 GMC C1500 that originally a 305. The engine in it now is supposed to be a 350. The only number I can see is on the pad on the passenger side of the engine behind the alternator. That number is V0826FSC I tried looking for the casting number at the rear but there is too much stuff...
  6. C

    how fast is your power window?

    I have a 84 C1500, mine are slow also. I thought I might be changing motors, but they still seem to work, just real slow.
  7. C

    Edelbrock Adapter questions

    You're right, it's that flat piece of steel that you need 2 gaskets for. When I initially purchased my carb (I purchased it directly from Edelbrock), I couldn't get it to seal. I called their Tech Line and was told no way would it seal without the plate, and the sales person should have told me...
  8. C

    Edelbrock Adapter questions

    Obviously you are much smarter than I am. A fuel pump pumps fuel. As long as it's the right one for my application, I use it. If my info helps fine if not, don't worry about it. Been playing with farm equipment, cars and trucks for 50 years, I have done ok so far.
  9. C

    Edelbrock Adapter questions

    Didn't say it would, and didn't say it was the same, and didn't say it would fit a chevy. I don't spend every waking minute looking at my car's parts. All this with the carb took place at least 5 years ago. I was just trying to help you out in case the problem I had was the same as yours. An...
  10. C

    Edelbrock Adapter questions

    It's the same as any other mechanical pump. Could even be a GM pump, AMC sourced parts from all manufacturers. It has a GM distributor, Ford starter and a Chrysler transmission.
  11. C

    Edelbrock Adapter questions

    This was all on my 1973 AMC Javelin with a 360 V8. I believe it's a 3 port but I would have to look. The car runs pretty good now so I just leave it alone. I check the gauge on the regulator every once in awhile to make sure it hasn't wandered. I'm sure it's not the original pump, but I don't...
  12. C

    Edelbrock Adapter questions

    Oh and the car has a mechanical fuel pump on it.
  13. C

    Edelbrock Adapter questions

    I did the adapter plate first. I did the regulator a couple of years later as I will still struggling with idle issues. I actually saw about the FPR in a YouTube video, and checked the carb book and sure enough it was in there about a regulator. I don't remember exactly what my fuel pressure...
  14. C

    Edelbrock Adapter questions

    I checked the part # and it's Edelbrock Carburetor Adapter # 2732. I had problems getting it to seal to the Edelbrock intake. I called their help line and was told I would never get it to seal without one. This was several years ago. The book that came with my 1406 when I purchased it, also says...
  15. C

    Edelbrock Adapter questions

    I can't remember the part number off hand but I'll look later on in my carb manual. I know I couldn't get mine to seal to the intake without it and couldn't stop the vacuum leak. Edelbrock also suggests a fuel pressure regulator. I put one on my OT car and it cured some of the stumble.
See more

Latest posts

Forum statistics

Threads
42,249
Posts
912,064
Members
33,749
Latest member
630erik1
Top