CalSgt's latest activity
-
CSummit sells Vortec heads capable of .525 lift and thread in studs complete. These require a vortec intake manifold. The older style...
-
CCalSgt reacted to 1lejohn's post in the thread Lost Two Gen 3 LS Engines in my 1986 C10 2WD with
Like.
Was the 5.3 an AFM, DOD engine? If so, the lifters might be stuck in the collapsed condition. -
CCalSgt reacted to Bloodhound1981's post in the thread Lost Two Gen 3 LS Engines in my 1986 C10 2WD with Haha.
Small block swap it. Sorry, had to.
-
CYeah, I want to incorporate this in with my firewall repair, that is why I brought it up. I appreciate the feedback.
-
CCalSgt reacted to Grit dog's post in the thread K5 Blazer repaint cap body color or white? How to remove fading paint on fiberglass. with Like.
^This too, except you can skip the epoxy primer on the topper if you want because it’s not made of steel. So you could save $50. It’s a...
-
CCalSgt replied to the thread K5 Blazer repaint cap body color or white? How to remove fading paint on fiberglass..^^^ This For the amount of work you're putting into it any rattle can paint will end up doing the same thing as the old white paint or...
-
CCalSgt reacted to TotalyHucked's post in the thread K5 Blazer repaint cap body color or white? How to remove fading paint on fiberglass. with Like.
White gets my vote, I like the top to be a contrasting color on a K5
-
CCalSgt reacted to Grit dog's post in the thread K5 Blazer repaint cap body color or white? How to remove fading paint on fiberglass. with Like.
I was gonna say protect the paint on the bedsides but looks like you’re done. That factory paint is pretty soft too. I was also goin to...
-
CCalSgt replied to the thread Firewall Cleanup : AC Install.Thats about what I did, only things I would do differently: 1) I didn't do any bodywork at all before spreading body filler. If I had...
-
CI plan to somewhat shave the firewall. I would like make the install as clean as possible but because I don't plan to shave the driver...
-
CCalSgt replied to the thread Hello From OH.Welcome from California
-
CHello all from Ohio Been lurking here over the last 2 years while building my 78 My Junk 388 fully forged stroker Comp 252 .600 110...
-
CCalSgt replied to the thread Firewall Cleanup : AC Install.IIRC you need the VA firewall plate and the evaporator box mounting brackets to do any of the work like drilling the holes etc, because...
-
CI'm still slowly putting my truck back together. So the system isn't charged yet nor the ducting installed. But I would follow some of...
-
C1968 El Camino, bought as a work truck in 1979, retired in 1997
