CalSgt's latest activity
-
C^^^^^^^and Coors Light....RIGHT ? @CalSgt ^^^^^^^
-
CI have 5.25 and 6.5 in the doors. If only my ears were next to my knees.
-
CCalSgt replied to the thread 84 K10 full exhaust replacement.I have nothing against 2.5" tubes but 2.25" will support about any streetable SBC you could put in that truck, might save you a few...
-
CCalSgt replied to the thread Roll Tide from the Gulf of America (AL).Howdy from California
-
CLooking forward to some guidance on redoing the four corners and taking out some rake.
-
CRead this thread https://www.gmsquarebody.com/threads/installing-a-new-exhaust-system-including-headers.45087/
-
CCalSgt replied to the thread Kick panel Speaker Mounts.It’s a little tricky, I originally cut the holes when I was in high school with the plasma cutter in welding shop. The hole is for 6.5”...
-
-
CCalSgt replied to the thread Kick panel Speaker Mounts.A lot of good info already, one thing that hasn't been mentioned yet, If the backside of the speaker is directly facing any hard...
-
CThese trucks suck for sound quality due mainly to limitations on speaker size/location. I have a pretty custom high end system and I...
-
CTypically the enclosure is what makes a speaker.
-
CCalSgt replied to the thread custom carpet and headliner.^^^^ This Exactly what I was going to say, Ive done 3 ACC carpets in my truck and put one in my moms K5 when I was a kid. A lot of work...
-
CWelcome Jack. You can get some headliner material at a fabric store and use a good spray glue to replace that. As far as the carpet goes...
-
CRun compression on ALL 8.(gotta add that part now.) Also check oil pressure with a mechanical gauge. How many miles are on it?
-
CSimilar, yes. Equivalent, no. Steering damper valving is quite different for the application compared to shocks in general.
-
CNeed more info. Define "angle is still out by 3-4 degrees". What transmission crossmember are you using? Also, are the ICT Billet mounts...
