bucket's latest activity
-
bucket reacted to legopnuematic's post in the thread Any tricks to getting your SB doors to close easier? with
Like.
The reason the striker needs the bushing (or pex, etc) is the latch is designed to work with the diameter of the bushing. If you study... -
bucket replied to the thread Dually Rims.Sure, using aluminum wheels that are lug-centric will work... but only on 4 of the wheels. The inside duals will still not have anything...
-
Very true, had one customer that installed aluminum wheels that were not hub centric. He wasn't paying attention and did not inspect the...
-
bucket reacted to nvrenuf's post in the thread I think a rod spun a bearing in my rebuilt 454 with Like.
It’s not that easy. Throwing a bearing in it might make it quiet for a minute but you haven’t diagnosed the reason for the failure. If...
-
bucket reacted to 77Dmax's post in the thread I think a rod spun a bearing in my rebuilt 454 with Like.
That won't work. That rod and it's partner will need resized and the crank will need turned. To the OP- Unfortunate turn of events...
-
Not long after he started powder coating he required all of his products to be done in gloss black, different colors or bare metal were...
-
bucket replied to the thread 1974 NOS doors..Damn. I have a couple NOS doors that I've never used yet. Maybe I should just sell them and reinvest some profit into nice used doors...
-
I bought an NOS door for my 1987 V3500 restoration project. I paid $1000 for it. In hind sight I should have bought a clean used door.
-
I also have a ratcheting cutter. Yes, it will cut anything but steel. I use it for battery cables, 2-0 and 4-0 on the medium duty trucks.
-
Have a couple, cuts hoses real clean.
-
bucket replied to the thread TH400 Slipping When Warm - Chunks in Oil Pan.I wouldn't throw away the spring. You never know how that could be repurposed in the future.
-
Drove down to Chatham VA for their monthly Cruise In, which are typically huge. Tonight the turnout was heavy due to the perfect...
-
bucket replied to the thread Lowest drop coil springs for c20/c30?.Just take out the springs altogether. The end result will be about the same as 6" drop springs. In other words: slammed, terrible...
-
bucket replied to the thread Sear's Craftsman Handi Cut Cutter.What @Snoots is hinting at, we need pictures!!! I vaguely remember the Craftsman Handi Cut name. Was this back in the 90's when Bob...
-
