Broken85's latest activity
-
First thought came to mind when I saw the delete post is “Timmmmmaayyyy” from South Park. -
attachment- wire diagram might help run down problem.
-
Broken85 replied to the thread Fuel tank switch.It’s the switch, or the switch valve. Have someone throw the switch a couple times while you are under there and see if there is any...
-
Are you sure it is the 3/4 shift bouncing or is it the TCC hunting? Could be an issue with the TCC lockup solenoid? Does the issue go...
-
Broken85 replied to the thread Fuel tank replacement on 1987 LS swapped square body.Replacing the tanks is just good hygiene for the motor. After 40 years, and at $90 each, it’s a no brainer. I would expect you have a...
-
Broken85 reacted to aasleson's post in the thread Fuel tank replacement on 1987 LS swapped square body with
Like.
Is he sure its an issue with the tank and just not a fuel line leaking at the sending unit? -
Broken85 reacted to crysalis's post in the thread Fuel tank replacement on 1987 LS swapped square body with Like.
I just finished both of mine on my '85 over the weekend. Granted, I dont have EFI like yours, but if you're gonna do it, prepare to do...
-
Broken85 replied to the thread 77 K-10 Silverado Suburban in Tuxedo Black.You better send some more picks before you find some gmsquarbody members in your garage!
-
Ohhhhhh idk if you mentioned the replacement bedside before. That's your problem. The inner mounting area for the tail light is too far...
-
I went round and round with this very same issue on my 1987 V10 when I first got it. From the look of the remains of the TCC plug...
-
The point is, who needs to have gas tanks in a matching color? They are tucked under the bed, and the bottom covered by a black shield.
-
Grab a can of galvanize spray and match two if it's really that big a deal. I guess I'm not alone in wondering why this matters. Is this...
-
Broken85 replied to the thread Gas tank replacement, 16 gallon.This sounds like a problem that doesn’t need to be solved………
-
A few buddies to lift it up and some sawhorses does wonders. I used a couple wheels and tires in the bed to offset the weight as I...
