Broken85's latest activity
-
Broken85 replied to the thread Tank selector.Suburban tanks are good, but Way more work switching to a single 40 from dual tanks instead of just swapping the valve if it’s bad and... -
Hmm my 40 year old tank selector still works fine,so I'd say reliability isn't a problem. I'd say fix what's wrong with OE parts and...
-
Broken85 replied to the thread Dash turn signals not working.I’d check the bulb socket with a test light and work backwards.
-
That space is where your sub-woofer goes. One 12" duo voice coil speaker. Air space is correct. Pulled it out to swap the speaker...
-
Broken85 reacted to Radiohead's post in the thread No power at some locations in fuse block with
Like.
I see one wire alternator and immediately go back to how the wiring from the field circuit got handled. Otherwise, all the previous... -
There are two red wires on the bullhead in the engine bay that supply different circuits with 12v battery power in the truck. IIRC they...
-
Broken85 replied to the thread No power at some locations in fuse block.Try checking continuity across the accessory circuits in the fuse box to see if you have a burned cross over, but I doubt it. I think...
-
-
Make your life easy I did not read your post it was too long for me. You do not need an ecm to control any 700r4. You do for a 4l60e...
-
Broken85 reacted to PrairieDrifter's post in the thread I am pretty sure my Charcoal canister is Clogged! with Like.
Not all of them had returns, even on dual tank trucks. Just connect one tank supply to the main supply, valve is bypassed to confirm...
-
Broken85 replied to the thread I am pretty sure my Charcoal canister is Clogged!.You said you eliminated the switching valve and hooked the tanks directly to the fuel line??? I am curious to hear how you did this...
-
Broken85 replied to the thread 700R4 Lockup Torque converter control issues solved.The vacuum switch on the passenger side contributes to the spark control system. The vacuum switch on the driver side is for the TCC...
-
