Broken85's latest activity
-
Broken85 replied to the thread 82 style bunper fog lights.Amazon too -
Broken85 replied to the thread Heat and AC.I would check the switch valve first. Get under the truck and have someone throw the switch and see if the valve is making noise. Two...
-
-
Broken85 replied to the thread Best rebuilt th 700R4?.If you are in AZ, ship a core to @NicksTransmissions in Las Vegas. It is your safest bet. If you watched some of his videos rebuilding...
-
Broken85 reacted to Edelbrock's post in the thread I think I figured out my brake problem with
Haha.
............ -
The fill hoses are available, at least they are for my 1987. I just received my order. New filler necks and hoses. The original valves...
-
Broken85 reacted to 77Dmax's post in the thread I think a rod spun a bearing in my rebuilt 454 with Like.
That won't work. That rod and it's partner will need resized and the crank will need turned. To the OP- Unfortunate turn of events...
-
Broken85 replied to the thread Dual tank install.Hopefully your wiring is still in place. The switches are available on LMC. Just make sure you get the right year. If they left the...
-
-
Broken85 reacted to NWSooner's post in the thread Custom Fuel Tank Location - Filler & Vent Hoses. with Like.
Here are some pics of the hidden fuel filler. The kit is made by a company called LSFab https://lsfab.com/
-
Broken85 reacted to papakay's post in the thread dies at low idle speeds, when put into gear and when stopped. with Like.
That’s a sweet truck you’ve got there! Your guesses are all solid, especially if it’s been sitting a while. Along with the fuel, carb...
-
Broken85 replied to the thread dies at low idle speeds, when put into gear and when stopped..OP, Look for air leaks between the carburetor and intake manifold at the gasket. It’s usually an easy starting place and could explain...
-
Broken85 replied to the thread 1981-87 Chrome body side molding.LMC makes precut kits too. My set is going on three years without issue, but full disclosure, mine stayes in the garage. Make sure you...
-
Broken85 reacted to RanchWelder's post in the thread Options for tuning of Gen1 TBI in 2023 with Like.
Not exactly. This post has been updated because the tuner mentioned has refused to honor the deal we made and confirmed. No names...
-
Broken85 replied to the thread 8.1 vortec into 1979 k30.I like your fab work on top of the cold case radiator to fill that gap, I have the same issue I am trying to solve. I bought the same...
-
The feed and return are zero PSI.. feed should actually be a vacuum most of the time. The only line on the pump that sees pressure is...
-
Broken85 replied to the thread fuel line clamps.Pumps for carbureted fuel systems are only 5psi-ish give or take (between 4-8lbs typcially). A good shoe strig will probably seal 5lbs...
