Bextreme04's latest activity
-
Bextreme04 replied to the thread Wiring harness pt3.Is that an aftermarket harness or a modified stock harness? MAF and IAT are in between the throttle body and intake box on a factory LS... -
seen it in the movie theater....opening weekend. circa June 29 1988 yes...getting "old" https://en.wikipedia.org/wiki/Coming_to_America
-
Bextreme04 replied to the thread 4" lift for 1977 k10.I have stock 5-leaf 1997 K2500 Suburban springs with a 2" shackle flip on the rear and Tuff Country 4" EZ-Ride HD springs on the front...
-
Built this cluster using the stock cluster from my 1987 V10, a factory tach cluster from a 1985 C20, and a couple 88-89 cluster parts...
-
Bextreme04 reacted to Fisherman166's post in the thread Anyone live in Portland, OR have a shop they like? Need to pass emissions… with
Like.
After doing more looking at the market, I agree. At most I'd say its a $5000 truck if I'm being generous, probably more like $4000. The... -
Bextreme04 replied to the thread Fuel tank replacement on 1987 LS swapped square body.I removed both saddle tanks, replaced all rubber hose and both sending units and re-installed them all in about 2 hours. In a gravel...
-
Bextreme04 replied to the thread Chuck’s engine build thread!.Sounds like its good to go. I think part of the reason Plastigauge has fallen out of favor is because there is so much chinese fake...
-
It’ll be “spicy” until I shred the transmission with a “HeLl YeAh BrOThEr” and this fall you’ll see “Chuck’s Transmission build thread”. Lol
-
Bextreme04 replied to the thread Oil Pressure Sending Unit Missing- Empty Threaded Hole.yes and yes. It will depend on what year and type of engine you have in there. I believe it would be 1/8, but I would just pull the plug...
-
Bextreme04 reacted to Ricko1966's post in the thread Oil Pressure Sending Unit Missing- Empty Threaded Hole with Like.
You are probably looking at the hole for the clutch ball.
-
Thanks a lot. I’m definitely gonna try this. Will keep you guys posted.
-
Bextreme04 reacted to Radiohead's post in the thread Anyone live in Portland, OR have a shop they like? Need to pass emissions… with Like.
Mine being an ole Cali spec'd rig, it has all that stuff on it. Lucky me, I'm out of the zone. I'll leave as much intact as possible...
-
Bextreme04 replied to the thread 1983 c30 A/C Compressor Clutch.Since you upgraded the compressor and have an all new system, I am even more convinced its electrical. Since you have the two pin plug...
-
The entire system was new. New evaporator core new condenser new compressor and new accumulator new orifice tube. Lines flushed with ac...
-
Bextreme04 replied to the thread 1983 c30 A/C Compressor Clutch.I would still guess it is electrical though. What compressor do you have? R4 or A6?
