BadBowtie's latest activity
-
Passenger side still works fine. Just dim. Driver side wasn't working so that is the ineni brutalized. The pic with the socket, you... -
Those are your turn signals. Dig the old bulb base out of it, soak it in some Coca Cola, coat a new bulb with dielectric and install...
-
Your removal method was wrong. 1157 bulbs do not just pull out like newer lamps. You push the bulb in, turn CCW and then it comes out...
-
Its a dual filament bulbs so yeah, ots two finction, and they are running lights. Bit there's numerous posts of here referring to them...
-
I don't think those are Fog Lights. Aren't those the actual running/turn signal lights? And only for that '82 model year...I think.
-
Yeah as I was posting this is, i saw napa can get some in for Monday. I guess it was a panic post. I thought it all came as one "unit"...
-
Its an 82 suburban with 6.2 diesel 4x4 k20. This was my big like tree, smart like rock moment. I bought new housings for my bumper...
-
Ohm out the resistor on the old gauge and the new gauge. Usually a faulty ground is the culprit when it pegs that far high. Can be at...
-
1982 K-10 (4x4). Replaced all gauges in the instrument cluster. Old/Original gas gauge did work, but needle was broke off. Got a new...
-
BadBowtie reacted to edgephoto's post in the thread Help needed getting seals/o-rings for driven gear housing with
Like.
Here is one A quick Google search for "TH400 Speedo housing seal" comes back with tons of places to order from including brick and... -
BadBowtie reacted to 87lwb's post in the thread Help needed getting seals/o-rings for driven gear housing with Like.
Appreciate the input! I'll go ahead and order that seal kit and new gear and put it back together. If the old o-ring on the adapter...
-
BadBowtie reacted to edgephoto's post in the thread Help needed getting seals/o-rings for driven gear housing with Like.
In the housing that goes into the transmission, there is an o-ring around the outside. Replace that and just wet it with some oil. No...
-
BadBowtie reacted to 87lwb's post in the thread Help needed getting seals/o-rings for driven gear housing with Like.
Hey guys, new poster, long-time lurker here. Just a little introduction, my current 87 long bed with 305 and TH400 is my second square...
-
Yep, they don't look right to me either. I've always liked the dealer bumpers the best.
-
Nope, those are more akin to the Ford step bumpers. That's always bothered me
