animal's latest activity
-
They're super easy to change, just release the 3 tabs on each side and it comes out the bottom Also swapped in my Esky interior... -
Plastic welding is much more difficult than I thought it would be. Especially in that small opening. I ended up melting the back edge of...
-
There was still a bit of hazing after the last couple coats since they were sprayed out in the humidity, so I was worried about the...
-
Kept playing with my spraying, sometimes I can get away with super light coats when it's humid like this. Wasn't happening this time...
-
Here's the backside. You're supposed to be able to use a pick or awl and bend those tabs up enough to get it to release. All I kept...
-
Friday after work, I loaded up all my junkyard scores, a bunch of tools and paint to finally spend a weekend tinkering at home instead...
-
Worked another 4 hours on them today. The upper is all but ready to install with the exception of one hole. It will NOT drill :mad: So...
-
Rear window installed Ball joints on the other hand….. :flipthebird: Have about 4 hours into it at this point and still have the...
-
I've been doing a few things in preparation for Power Tour again. Just piddly stuff. I wired in a power inverter, complete with a...
-
animal replied to the thread Old77’s GMT400 SWB 4x4 5-speed project/DD.Told me he could not find it without pepper, tweezers, and a magnifying glass :shrug:
-
Well, here she is for now. Overall, I’m very happy with the results. I didn’t realize until I started fitting up the patch piece that...
-
Hole is about 85% ready for the patch piece. Just some fine tuning on both the patch and the hole before I’m ready to start tacking and...
-
The best score of the day was this steering wheel! This came from my friend's yard too, they'd just taken in a low mile '06 GMC Envoy...
-
This yard gets $5/ea for vent assemblies. So I just popped that little button off of each one, they don't charge you for little knick...
-
Stopped back in that yard again today in between going to 2 others to look at that '06 hood. It was still there, it was straight as an...
