I had the vaccum advance disconnected. Port plugged off. Ive got 2 old school timing lights. Old penski and a snap on. Tried them both to see if there was an issue on my first one but they both read the same. They arent dial backs. I set the piston on tdc and was showing on my original marking...
So update on the motor. Found intake gaskets were leaking. Replaced the gasket and engine runs now. But having timing issues now. Not sure how its happened but mark on harmonic balancer is wayyyy off. Engine and starts but dont run the greatest. Moved wires one position over to adjust for the...
Yeah ive had it on both port and manifold vaccum. Most time on manifold. For the most recent pic i put on port just cause i had my vacuum gauge on the manifold port to see what was going on and didnt have little plug handy so throw hose on there. But i just read that the manual looking for...
Ok i will try that. As you can see on the pic i do have a fuel filter and it stays full. And was about 6.5 to 7 psi on the gauge but im will to try it.
Just an update on vacuum today. Had few mins so fired it up. Ran about a 10 on my vacuum gauge. Motor ran about 900 rpms for about 10sec before acting like it was starving. I checked at manifold vaccum on the carb itself. Did learn that with choke closed it would let me give it throttle. But not...
I hear you and totally understand. The guy i got it from is a die hard LS guy his shop specializes in LS swaps. The costumer which the motor came from. It was in a 1968 camaro. The customer wanted a new turbo LS installed in his car. Cause he want be able to cruise it and have more power at the...
I did not know that on the 4 corner mixing screws. Thanks! Since that picture was take i have moved the vaccum to manifold. That particular carb which is on that picture has had everything on the choke removed. Thats why i it wasnt wired up.
Whats going to be the best way to check for leak on the manifold? If i cant get it run long enough is there way to do it with out the car running? Its has all new manifold gaskets on it but that dont mean it cant be leaking.