77Dmax's latest activity
-
777Dmax replied to the thread Stock Cold air intake performance upgrades.Cold air intakes are a joke to begin with. Way too many variables to quantify a 10-15 horse "gain" on a chassis dyno. Folks hear more...
-
777Dmax replied to the thread Nylon cam gear years.Please post an update as to how well the clutch functions along with a part number. I've replaced several before and usually they don't...
-
777Dmax replied to the thread Broken exhaust flange bolts.I've welded several that were flush to the surface. It'll be difficult to do upside down though. With a good cobalt bit you should be...
-
777Dmax replied to the thread 1996 c1500 5.7L - crank no start.It needs 58 psi to start.
-
777Dmax replied to the thread Nylon cam gear years.It was my understanding that the gear was cast with the teeth and set in a mold for the nylon. This eliminated any machine work. I'm not...
-
777Dmax replied to the thread Nylon cam gear years.I believe the primary reason for the nylon teeth was a production issue. Was easier and cheaper to make the nylon teeth vs. machining...
-
777Dmax replied to the thread Am I Crazy? Lincoln Drive Train Swap.A 78 460 is a smogged turd that is probably about 200 hp. There are better candidates out there.
-
777Dmax replied to the thread Steering does not self center..Not enough caster or super stiff balljoints
-
777Dmax replied to the thread Have a great Snap On dealer finally.They can use their discretion with warranty stuff. I once saw a coworker use a deep snap on 1 1/2" socket as a press fixture for a wheel...
-
7Yep, I used to see them all the time. There was one other 3rd gen at my HS and that guy had the iron duke Berlinetta.
-
777Dmax replied to the thread 1988 Camaro.Anyone ever see an early F car with the iron duke 2.5? Thats a rare one..
-
777Dmax replied to the thread Bought a new impact wrench.I have a ton of Milwaukee tools at work. I would warn against letting the impacts hammer. They aren't like pneumatic impacts. I've...
-
777Dmax replied to the thread 12v Cummins Swap Wiring.Whats nice about GMs of this era is the computer harness is separate from the engine and light harness. All the computer stuff comes out...
-
777Dmax replied to the thread 1991 Suburban 3/4 ton: TBI to Holley Sniper conversion - stupid, or worth it?.I'm actually working on retrofitting a GM tbi to an old Buick. I think I'm going to use a megasquirt controller. I have the...
-
777Dmax replied to the thread Vortec 8100/8.1L Oil Pan.For that kind of money it's not worth trying to find used pieces.
