75gmck25's latest activity
-
75gmck25 replied to the thread Towing with my 86.... hints, tips, essentials?.1st priority - electric trailer brakes and a good controller. When you hit the brakes you want that trailer to drag you down like an... -
75gmck25 replied to the thread Removing instrument panel - dealing with the oil pressure line.I’ve always disconnected the oil line in the engine compartment. It’s not real hard to reach, and the two nuts for the compression...
-
75gmck25 replied to the thread Carb Adapter.I also recall an Engine Masters episode where they found an open hole spacer on a dual plane was a good combination. It got a little...
-
75gmck25 replied to the thread Quick and easy engine rear support when transmission is removed?.If you can buy a short piece of angle iron, it seems you could use blocks or spacers to bolt it to the frame and support the engine...
-
75gmck25 replied to the thread Exhaust Question.If you want a nice mellow, straight-through muffler, take a look at Magnaflow. I have them with duals and an H-pipe and it has strong...
-
75gmck25 replied to the thread AFR GAUGE addition?.I bought one of these several years ago, and it's been really useful. https://www.innovatemotorsports.com/db-red-gauge-lc-2-kit.html...
-
75gmck25 replied to the thread Turn signal switch.When I bought a new turn signal switch the wiring connector on the end had "almost" the right spacing. However, I couldn't get all the...
-
75gmck25 replied to the thread Smoking Ground Wire.Start with the dash cluster. There should be a black ground wire up high under the dash. On an '87 I think there is a ground bus it...
