H
H2OnSnow
Latest activity Postings About
-
-
HH2OnSnow replied to the thread Grounding question.Danger: Geek out ahead... One's gotta be careful with the Interwebs. The gist of this point is completely correct, it's just that the...
-
HH2OnSnow replied to the thread Tightening down front yoke nut stops NP205 from turning.Have you looked at the service manual for your truck (https://www.gmsquarebody.com/threads/1973-1991-service-manuals.14499/)? What made...
-
HThese squares were built with two ground wires to the battery. Large (4 gauge) to the engine, (10 gauge) to the fender. Bolts are the...
-
HYou should also use star washers. Not saying you need to buy this kit, but you could maybe buy some star washers if you don't have some...
-
HH2OnSnow replied to the thread Grounding question.Do you not remember finding a ground strap between the bed and the frame when you pulled the old one? Yes, you need a ground strap from...
-
HI'm sure the backside of the trim could be filled and leveled with some type of epoxy... but gol dang that would be tedious, time...
-
HH2OnSnow replied to the thread Battery to body ground.Just replacing a braided ground strap with a large gauge cable may or may not give you a "better" ground. The braided strap from the...
-
HJust use a multimeter. If it shows negative voltage your red.lead is on ground and your black lead is on power. And no need for 25 foot...
-
HH2OnSnow reacted to Rustisbest's post in the thread What have you done to your square lately?? with
Wow.
I hate how they put lines and mark tires up with a bunch of junk nowadays so I got after these with the DA in between rain showers today -
HH2OnSnow reacted to Johnny Atomic's post in the thread What have you done to your square lately?? with Like.
more pics
-
HH2OnSnow reacted to Johnny Atomic's post in the thread What have you done to your square lately?? with Like.
I've been working on a USB panel for the ashtray. I bought a blank 3d printed insert from Etsy. And mounted a 12v multiple USB with...
-
HH2OnSnow replied to the thread What have you done to your square lately??.The guys over here have a good source. Sorry I don't remember where in there I found it. https://www.67-72chevytrucks.com/
-
HH2OnSnow replied to the thread NP203 question.Don't run locked hubs with an unmodified 203 on hard dry pavement. You can get away with that for a while as long as you drive easy and...
-
HH2OnSnow replied to the thread Dash turn signals not working.How are you measuring that? You should be using the two contacts in the socket so that you are seeing exactly what the bulb is seeing...
-
HH2OnSnow reacted to TotalyHucked's post in the thread What have you done to your square lately?? with Like.
Got the rear disc kit installed finally
-
-
Loading…
-
Loading…
