Rich77
Latest activity Postings About
-
-
I have a similar bracket setup at the front of my mufflers but used HD angle iron with pre-punched holes. It’s not that attractive, but... -
Rich77 replied to the thread Exhaust pipe bracket.Instead of welding in brackets/hangers, I decided to run an aluminum angle from one side to the other and bolt my hangers to that. I’ll...
-
-
Rich77 reacted to bucket's post in the thread Header fitment and exhaust routing with NP203 with
Like.
My K30 has a TH400 and 203, along with headers and dual 3 inch pipes. It's tight, but it all fits above the crossmember. -
Rich77 reacted to CatRacer's post in the thread Header fitment and exhaust routing with NP203 with Like.
Here's what I did. Hedman headers and 3" true dual w/x-pipe. Mishimoto v-bands on the headers to 10" stainless flex pipe. Obviously...
-
Rich77 replied to the thread Anyone run 18” on your 2WD?.I just plan to tool around and smoke some rubber. I decided on: 295/45/18 rear on 18x9.5 245/40/18 front on 18x8 I’ll post some pics...
-
Those are vastly different sizes, here's a good link I play with all the time to figure out tire size: https://tiresize.com/calculator/...
-
My thoughts are you can cut cardboard or plywood disc's of the appropriate diameter and bolt thembto your truck. Now break out the tape...
-
Rich77 replied to the thread Anyone run 18” on your 2WD?.Or, should I go- 295 or 285/40 or 45/18 rears And 245/40/18 fronts Thoughts??
-
20's Detroit Rally's on this C10 18 on the front and 20 on the rear on this square Or these 20" Detroit Mack wheels in white
-
Really digging these 20" HALIBRAND SPRINT WHEELS now:
-
Those are awesome wheels, my buddy has them on his '76 he just built
-
Rich77 reacted to bluex's post in the thread Wanna slam that 63-98 C10/C1500? Lets talk about it! with Like.
C notch: On 73-87 trucks with a flip kit, you don’t necessarily need a notch. If you just plan to cruise around in the truck and won’t...
-
Rich77 reacted to TotalyHucked's post in the thread Help me out of this rabbit hole ! Lowering, wheels, backspacing, tire sizing - help ! with Love.
I have never used MaxTrac, I always use McGaughys or Belltech because they are the top 2 quality companies and I've had great luck with...
-
Rich77 reacted to Scott91370's post in the thread Help me out of this rabbit hole ! Lowering, wheels, backspacing, tire sizing - help ! with Like.
Rubbing: Rear you will be 100% fine. Fronts you shuld be ok as well since you're wheel/tires will be inboard more than mine are...
-
Hello Everyone, My truck is a ‘77 C10 with a 2/4 drop. This is the wheel and tire combo I’m thinking of using. 285/60/18 rear with...
-
-
Loading…
-
Loading…
