1sik78
Full Access Member
- Joined
- Aug 8, 2013
- Posts
- 153
- Reaction score
- 6
- Location
- Sparks,Nevada
- First Name
- Manuel
- Truck Year
- 1978
- Truck Model
- C10 pickup
- Engine Size
- 250 inline 6
So I am done with my ls swap 5.3 and drove the truck and so far it's all good. I have not got on the highway yet only got up to 35 mph.
My question is how do I know if I hooked up the TCC brake switch (blue pin 33) correctly. I used a relay that had 5 pins but the diagram in front of the relay is different looking than the LT1swap.com one it still has the same numbers and I matched all of them.
This is the relay I am using
Sent from my iPhone using Tapatalk
My question is how do I know if I hooked up the TCC brake switch (blue pin 33) correctly. I used a relay that had 5 pins but the diagram in front of the relay is different looking than the LT1swap.com one it still has the same numbers and I matched all of them.
You must be registered for see images attach
This is the relay I am using
You must be registered for see images attach
Sent from my iPhone using Tapatalk